Detail zboží

Informace o produktu
Výrobce:Hacker Motor
Název zboží:B50-12XL Competition + 6,7:1 Kv 1480
 
Kategorie:ELEKTROMOTORY > Střídavé > Letecké > Hacker > Inrunner > Hacker B50 >
 
Cena s DPH:11030,00 ks   vložit zboží do košíku
 
Obj. číslo:10100976
EAN:4250320254515
Dostupnost:2 týdny
Popis:Střídavý elektromotor Inrunner Ø37x105mm, KV1480 ot./min na V; váha 405g, hřídel 6mm, max. výkon 2500W (15 sec).
Obrázky produktu

area of application: sportive Glider upto ~10-16kg at 8S LiPo

 

- typical Glider Setup:

RFM 20x13 at 8S LiPo 28,8V, 56A, 5490RPM, 1612W

RFM 23x12 at 8S LiPo 28,8V, 57,5A, 5530RPM, 1656W

 

The integrated high-performance fan cools the B50 competition motors in the most effective way. The running noise is also reduced to a minimum with asymmetrically positioned air outlet holes. The outer housing design with milled cooling grooves offers perfect heat radiation with the lowest possible weight.


The B50 competition motors are equipped with segmented high-performance rotors made from optimized magnetic material.


The B50-Competition is equipped with larger ball bearings than its predecessor Hacker B50. This significantly reduces friction and optimizes service life. In addition, a stronger, internal shaft with a diameter of 6mm prevents vibrations at extreme speeds. The front and rear end shields are screwed together. The shaft is equipped with an integrated pinion. The increased power output of the B50 competition motors is guaranteed by a high-performance gearbox with a 6mm shaft. 

 
Specifiactions
max. power range [W] (max.15 sec.) 2500
Poles 2
Turns 12
Idle current (I0) at 8.4V [A] 2,1
Internal resistance (Ri) [Ohm] 0,015
Gear reducing 6,7:1
Recommended timing [°] 0 - 5
Switching Frequenzy [kHz] 8
Controller recommendation [A] (depending on setup) 70 - 130
Leerlaufdrehzahl pro Volt (kv) ohne Getriebe 1480
Dimensions and weight
Weight [g] 405
Length [mm]/[in] 105
Outer diameter [mm]/[in] 37
Shaft diameter [mm]/[in] 6
Delivery contents
Prop Adapter Nein
Mounting cross Nein
Gold plug mm (recommended) 4 - 5,5
Backmount mountable Nein
Front mountable Ja