obsah košíku
ceník ke stažení
|
| ||||||||||||||||||||||||||||
Product description and features
Compact 4-pole internal rotor motor with 6.7:1 reduction gear and 6-millimetre shaft, e.g. also suitable in conjunction with the FesEx-Uni8 system.
Drive recommendation
This design is recommended for gliders with a take-off weight of approx. 8 to 10 kilograms and 6S LiPo drive battery.
| Propeller | RFM 20x13 |
|---|---|
| Voltage (Cells LiPo) | 22,5V (6S) |
| Current | 89A |
| Power | 2003W |
| RPM | 5880 |
Delivery contents
Inrunner with reducting gear, GRP spacer ring, special drive grease and mounting and operating manual.
| Specifiactions | |
| Poles | 4 |
| Turns | 3,5 D |
| Idle current (I0) at 37V [A] | 2,8 |
| Internal resistance (Ri) [Ohm] | 0,019 |
| Gear reducing | 6,7:1 |
| Output shaft | 6mm |
| Recommended timing [°] | 5-10 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 90 - 125 |
| Leerlaufdrehzahl pro Volt (kv) ohne Getriebe | 2070 |
| Dimensions and weight | |
| Weight [g] | 445 |
| Length [mm]/[in] | 99,85 |
| Outer diameter [mm]/[in] | 46 |
| Shaft diameter [mm]/[in] | 6 |
| Delivery contents | |
| Prop Adapter | Nein |
| Mounting cross | Nein |
| Gold plug mm (soldered) | 4 |
| Backmount mountable | Nein |
| Front mountable | Ja |
