|
|
Product description and features
The A20-LN series has been specially developed for glider models with narrow fuselages. Since the fuselage becomes significantly thicker a few centimeters after the motor frame, a small torsional outrunner in direct drive can be used. Die A20-LN-Motoren ist doppelt kugelgelagert, verfügt über eine austauschbare 4mm Welle und kann nur Frontmount montiert werden.
The weight-optimised high-end motor A20-22 L-LN EVO kv924 with a weight of only 68g is ideally suited for glider models up to 1.0Kg and motor and sports aircraft up to approx. 600g
Accessories
The suitable controllers, batteries and a suitable propeller can be found in the Accessories tab.
Scope of delivery
A20-22 L-LN EVO kv924 and manual.
Drive recommendation
A20-22 L-LN EVO kv924 | ||||||
---|---|---|---|---|---|---|
Product no.: 10109203 | ||||||
propeller | APC-SL 10x4.7 | ACC 11x6 | ||||
LiPo | 3S | 3S | ||||
Voltage [V] | 11.1 | 11.1 | ||||
Current [A] | 15 | 17 | ||||
Power [W] | 165 | 187 | ||||
RPM | 7230 | 7200 | ||||
Controller [A] | 20-30 | 20-30 | ||||
Timing [°] | 20-25 | 20-25 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 200 |
Poles | 14 |
Turns | 22 |
Idle current (I0) at 8.4V [A] | 0,75 |
Internal resistance (Ri) [Ohm] | 0,109 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 20 -30 |
Idle speed per volt (kv) | 924 |
Dimensions and weight | |
Weight [g] | 68 |
Length [mm]/[in] | 44,6 |
Outer diameter [mm]/[in] | 27,8 |
Shaft diameter [mm]/[in] | 4 |
Delivery contents | |
Prop Adapter | Nein |
Mounting cross | Nein |
Gold plug mm (soldered) | 3,5 |
Backmount mountable | Nein |
Front mountable | Ja |