Product information
The Q100-6L fits perfect to electric powered large rc-models. Ideal for 3D / aerobatic models up to ~ 25kg weight. Also in scale models up to ~ 35kg , the motor makes a good figure.
The new Propadapter with 34mm bolt circle and 6 x M5 screws transmits the high torque of Q100 perfectly to the Prop.
Technical Data:
Powerrange |
|
max. 10000W (15 sec.) |
Idle current bei 8,4V |
|
2,50A |
Resistance |
|
0,0072 Ohm |
Kv |
|
114 |
Weight ~ |
|
2300g |
Diameter |
|
113 mm |
Lenght (Backmount - Prop) |
|
107,5 mm |
Pole |
|
28 |
recommend ESC |
|
MasterSpin 170 OPTO |
recommend Timing |
|
25° |
|
|
|
Specifiactions |
max. power range [W] (max.15 sec.) |
10000 |
Poles |
28 |
Turns |
6 |
Idle current (I0) at 8.4V [A] |
2,5 |
Internal resistance (Ri) [Ohm] |
0,0072 |
Recommended timing [°] |
25 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
220 - 300 |
Idle speed per volt (kv) |
114 |
Dimensions and weight |
Weight [g] |
2330 |
Length [mm]/[in] |
107,5 |
Outer diameter [mm]/[in] |
113 |
Delivery contents |
Prop Adapter |
Ja |
Mounting cross |
Ja |
Gold plug mm (recommended) |
8 |
Backmount mountable |
Ja |
Front mountable |
Nein |
|