|
|
Product description and features
The A60-8M Glider is perfectly suited for large glider models of up to approx. 25 kilograms and 12S LiPo drive battery.
Thanks to its long shaft, the motor can be placed in the fuselage in such a way that either a scale spinner or a small center pole for the propeller can be used in front of the fuselage nose. The visual appearance of the fuselage is thus largely preserved. We recommend a support bearing in the nose of the fuselage (see tab "Accessories").
Scope of delivery
1x A60-8M V4 28-Pole Glider kv180, 1x Befestigungskreuz und 4x Schrauben, 1x ball bearing.
Drive Recommendations
A60-8M V4 28-Pole Glider kv180 | ||||||
---|---|---|---|---|---|---|
Artikel-Nr.: 15701908 | ||||||
Propeller | RFM 20x13 | |||||
LiPo | 12S | |||||
Voltage [V] | 46,10 | |||||
Current [A] | 62,00 | |||||
Power [W] | 2858 | |||||
RPM | 6974 | |||||
Controller [A] | 70-90 | |||||
Timing [°] | 20-25 |
Specifiactions | |
Poles | 28 |
Turns | 8 |
Idle current (I0) at 8.4V [A] | 1,5 |
Internal resistance (Ri) [Ohm] | 0,03 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 80 - 120 |
Idle speed per volt (kv) | 180 |
Dimensions and weight | |
Weight [g] | 751 |
Length [mm]/[in] | 72,8 |
Outer diameter [mm]/[in] | 60 |
Shaft diameter [mm]/[in] | 8 |
Delivery contents | |
Prop Adapter | Nein |
Mounting cross | Ja |
Gold plug mm (recommended) | 4 - 5,5 |
Backmount mountable | Nein |
Front mountable | Ja |