|
|
Product description and features
The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.
The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A10-12S kv2900, aluminium prop adapter, GRP bulkhead, adapter for GWS and APC propellers, O-rings and mounting screws.
Drive Recommendations
A10-12S kv2900 | ||||||
---|---|---|---|---|---|---|
Item no.: 97100006 | ||||||
Propeller | GWS 4,5x4 | GWS 5x3 | ||||
LiPo | 2S | 2S | ||||
Voltage [V] | 7,4 | 7,4 | ||||
Current [A] | 5,3 | 5,1 | ||||
Power [W] | 39 | 37 | ||||
RPM | 15100 | 15200 | ||||
Controller [A] | 5-7 | 5-7 | ||||
Timing [°] | 10-15 | 10-15 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 55 |
Poles | 12 |
Idle current (I0) at 8.4V [A] | 1 |
Internal resistance (Ri) [Ohm] | 0,185 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 5 - 10 |
Idle speed per volt (kv) | 2900 |
Dimensions and weight | |
Weight [g] | 15 |
Length [mm]/[in] | 21 |
Outer diameter [mm]/[in] | 21 |
Shaft diameter [mm]/[in] | 2 |
Delivery contents | |
Prop Adapter | Yes |
Mounting cross | Yes |
Gold plug mm (soldered) | 2 |
Backmount mountable | shaft conversion required |
Front mountable | Yes |