|
|
Product description and features
The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.
The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A10-13L kv1300, aluminium prop adapter, GRP bulkhead, adapter for GWS and APC propellers, O-rings and mounting screws.
Drive Recommendations
A10-13L kv1300 | ||||||
---|---|---|---|---|---|---|
Item no.: 97100010 | ||||||
Propeller | GWS 7x3,5 | GWS 8x4,3 | APC SF 8x3,8 | |||
LiPo | 3S | 3S | 3S | |||
Voltage [V] | 11,1 | 11,1 | 11,1 | |||
Current [A] | 3,8 | 7,0 | 7,3 | |||
Power [W] | 40 | 74 | 77 | |||
RPM | 10860 | 8150 | 7700 | |||
Controller [A] | 7-10 | 10-12 | 10-12 | |||
Timing [°] | 20-25 | 20-25 | 20-25 |
Specifiactions | |
max. power range [W] (max.15 sec.) | max. 75 (15 sec.) |
Poles | 12 |
Idle current (I0) at 8.4V [A] | 0,39 |
Internal resistance (Ri) [Ohm] | 0,28 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 5 - 10 |
Idle speed per volt (kv) | 1300 |
Dimensions and weight | |
Weight [g] | 20 |
Length [mm]/[in] | 25 |
Outer diameter [mm]/[in] | 21 |
Shaft diameter [mm]/[in] | 2 |
Delivery contents | |
Prop Adapter | Yes |
Mounting cross | Yes |
Gold plug mm (soldered) | 2 |
Backmount mountable | shaft conversion required |
Front mountable | Yes |