|
|
Product description and features
The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.
The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A10-9L kv1700 + 4,4:1, 1 instruction manual.
Drive Recommendations
A10-9L kv1700 + 4,4:1 | ||||||
---|---|---|---|---|---|---|
Item no.: 97104409 | ||||||
Propeller | ACC 14x9 | ACC 13x8 | ||||
LiPo | 3S | 3S | ||||
Voltage [V] | 11,0 | 11,0 | ||||
Current [A] | 9,1 | 6,5 | ||||
Power [W] | 100 | 71 | ||||
RPM | 3575 | 3960 | ||||
Controller [A] | 10-12 | 10-12 | ||||
Timing [°] | 20-25 | 20-25 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 105 |
Poles | 12 |
Idle current (I0) at 8.4V [A] | 0,72 |
Internal resistance (Ri) [Ohm] | 0,18 |
Gear reducing | 4,4 : 1 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 12 |
Leerlaufdrehzahl pro Volt (kv) ohne Getriebe | 1700 |
Dimensions and weight | |
Weight [g] | 40 |
Length [mm]/[in] | 43 |
Outer diameter [mm]/[in] | 21 |
Shaft diameter [mm]/[in] | 3 |
Delivery contents | |
Prop Adapter | No |
Mounting cross | No |
Gold plug mm (soldered) | 3,5 |
Backmount mountable | No |
Front mountable | Yes |