Product description and features
Compact 4 pole inrunner motor with 6.7:1 reducting gear and 6 millimeter shaft e. g. suitable in combination with the the FesEx-Uni8 system.
Drive recommendation
This setup is recommended for sport gliders with approx. 10 to 12 kilograms take-off weight and 10S LiPo drive battery.
Delivery contents
Inrunner with reducting gear, GRP spacer ring, special drive grease and mounting and operating manual.
Specifiactions |
Turns |
3,5 D |
Idle current (I0) at 37V [A] |
2,8 |
Internal resistance (Ri) [Ohm] |
0,019 |
Gear reducing |
6,7:1 |
Output shaft |
6mm 6 |
Recommended timing [°] |
5 - 10 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
80 - 125 |
Leerlaufdrehzahl pro Volt (kv) ohne Getriebe |
1480 |
Dimensions and weight |
Weight [g] |
445 |
Length [mm]/[in] |
99,8 |
Outer diameter [mm]/[in] |
46 |
Shaft diameter [mm]/[in] |
6 |
Delivery contents |
Prop Adapter |
Nein |
Mounting cross |
Nein |
Gold plug mm (soldered) |
4 |
Backmount mountable |
Nein |
Front mountable |
Ja |