Product information

Product information
Producer:Hacker Motor
Name:A50-12L Turnado V3 kv450 - Glider
 
Category:ELECTRIC MOTORS > Brushless > Air > Hacker > Outrunner > Hacker A50 >
 
Price:217,00€ pc  
 
Item No:97826734
EAN:4250320248743
Delivery status:2 weeks
Product information:Outrunner brushless electric motor Ø51,5x61mm, KV450 RPM/V, weight 445g, shaft 6mm, max. power 4000W (15 sec).
Product photo
more photos...

Product description and features

The Turnado V3 Glider fits seamlessly into our range of sail noses/FES drives. Due to the shaft extension with integrated support bearing, this drive can also be installed in slim sail noses. The shaft can be easily moved by loosening the three M3 screws on the back. The model can be converted to a glider in no time. It is possible to switch between electric flight and glider towing. The shaft has a diameter of 6 mm, for the use of the usual prop drivers and scalespinners.

This weight-optimised high-end motor with a weight of only 507g fits perfectly in glider models from 12 kg to 16 kg.

Accessories

You will find suitable controllers, batteries and a suitable propeller in the accessories tab.

Scope of delivery

1x A50-12L Turnado V3 kv450 - Glider and manual.

Drive recommendation

 

A50-12L Turnado V3 kv450 - Glider
Item no.: 97826734
Propeller RFM 13x10 RFM 14x10
Model kg 12 16
LiPo 6S 6S
Voltage [V] 22,2 22,2
Current [A] 70-80 80-90
Power [W] 1443 1665
RPM 9009 8819
Controller [A] 80-90 90-120
Timing [°] 15-20 15-20
Antriebsvorschlag
Propeller 13"-15"
Specifiactions
max. power range [W] (max.15 sec.) 4000
Poles 10
Turns 12
Idle current (I0) at 8.4V [A] 1.2
Internal resistance (Ri) [Ohm] 0.019
Output shaft 6
RPM max. 24000
Recommended timing [°] 15-20
Switching Frequenzy [kHz] 8
Controller recommendation [A] (depending on setup) 75-130
Idle speed per volt (kv) 450
max. current [A] 75
Dimensions and weight
Weight [g] 445
Length [mm]/[in] 61
Outer diameter [mm]/[in] 51.5
Shaft diameter [mm]/[in] 6
Delivery contents
Prop Adapter Nein
Mounting cross Ja
Gold plug mm (soldered) nein
Gold plug mm (recommended) 4
Backmount mountable Nein
Front mountable ja