Product information
The Q80-L fits perfect to electric powered large rc-models. Ideal for 3D / aerobatic models with ~ 2.5 -2,6m span and up to ~ 12kg (Aerobatics 15kg) kg weight. Also in scale models to ~ 20kg or fast WW2 models to 18kg, the motor makes a good figure.
The new Propadapter with 30mm bolt circle and 4 x M5 screws transmits the high torque of Q80 perfectly to the Prop.
Technical Data:
Powerrange |
|
max. 7000W (15 sec.) |
Idle current bei 8,4V |
|
1,7A |
Resistance |
|
0,012 Ohm |
Kv |
|
155 |
Weight ~ |
|
1335g |
Diameter |
|
88,5 mm |
Lenght (Backmount - Prop) |
|
89,3 mm |
Pole |
|
28 |
recommend ESC |
|
MasterSpin 170 OPTO |
recommend Timing |
|
25-30° |
Shaft |
|
10mm |
Specifiactions |
max. power range [W] (max.15 sec.) |
7000 |
Poles |
28 |
Turns |
7 |
Idle current (I0) at 8.4V [A] |
1,7 |
Internal resistance (Ri) [Ohm] |
0,012 |
Recommended timing [°] |
25 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
170 - 300 |
Idle speed per volt (kv) |
155 |
Dimensions and weight |
Weight [g] |
1335 |
Length [mm]/[in] |
89,3 |
Outer diameter [mm]/[in] |
88,5 |
Delivery contents |
Prop Adapter |
Ja |
Mounting cross |
Ja |
Gold plug mm (recommended) |
5,5 - 8 |
Backmount mountable |
Ja |
Front mountable |
Nein |
|