cart
download
|
| ||||||||||||||||||||||||||||
The Q80-L fits perfect to electric powered large rc-models. Ideal for aerobatic models with ~ 2.5 -2,8m span and up to ~ 15kg weight. Also in scale models to ~ 20kg the motor makes a good figure.
The new Propadapter with 30mm bolt circle and 4 x M5 screws transmits the high torque of Q80 perfectly to the Prop.
Technical Data:
| Powerrange | max. 6000W (15 sec.) | |
| Idle current bei 8,4V | 1,4A | |
| Resistance | 0,015 Ohm | |
| Kv | 135 | |
| Weight ~ | 1335g | |
| Diameter | 88,5 mm | |
| Lenght (Backmount - Prop) | 89,3 mm | |
| Pole | 28 | |
| recommend ESC | MasterSpin 170 OPTO | |
| recommend Timing | 25-30° | |
| Shaft | 10mm |
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 7000 |
| Poles | 28 |
| Turns | 8 |
| Idle current (I0) at 8.4V [A] | 1,4 |
| Internal resistance (Ri) [Ohm] | 0,015 |
| Recommended timing [°] | 25 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 170 - 300 |
| Idle speed per volt (kv) | 135 |
| Dimensions and weight | |
| Weight [g] | 1335 |
| Length [mm]/[in] | 89,3 |
| Outer diameter [mm]/[in] | 88,5 |
| Delivery contents | |
| Prop Adapter | Ja |
| Mounting cross | Ja |
| Gold plug mm (recommended) | 5,5 - 8 |
| Backmount mountable | Ja |
| Front mountable | Nein |
