|
|
Performance electric sailplane for sports and competitions flying RCEN, RCEO and RCE7 categories.
Many expert pilots will be particularly surprised by its excellent flight qualities, given by the thin wing airfoil and weak weight.
Thanks to large area length the model has calm and steady gliding. There are several possibilities how to mix the functions of the flaps (high performance thermal soaring, spot landing etc.).
The wing spar from carbon fibre is giving the wing enough strength and stiffness.
The model is designed and manufactured in Czech Republic.
Technical specification:
|
|
|
|
|
|
|
Content of the set:
- Light fuselage moulded in white tinted epoxy fiberglass
- Two piece wing is made in balsa framework with wing joiner, leading edges and wing spar made of carbon and covered with Oracover®
- Tailplane are made in a balsa framework with carbon spar and leading edges and covered with Oracover®
- Top quality accessories and decal sheet
- Complete assembly manual with step by step illustrations
When you will use the lighter equipment than it is recommended below, its necessary to add the ballast to achieve the correct position of the center of gravity (CG).
Equipments required
JSP-44 Name: SPIN 44 PRO Price: 104,20€ Delivery status: in stock SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of BEC for models operating at higher voltages. A significant factor is that the BEC circuit maintains its full current capability right up to the maximum voltage. | |
3EL10529V2L Name: AXI 2820/12 GOLD LINE V2 Long Price: 103,75€ Delivery status: in stock Ø35x52mm, RPM 990/1V, weight 158g. Brushless outrunner new generation of extended tapered front edge for easy installation in gliders. Glider to 2400 g, 3-5s LiPo power, shaft 5 mm, regulator 40-60A. | |
020106-PO Name: Transport bags for Prelude REF Price: 65,00€ Delivery status: in stock Bags for wings, elevator and rudder. | |
2462 Name: Accu LiPol Xpower 2700-3S ECO 25C Price: 37,46€ Delivery status: in stock 2700-3S ECO-S (11,1V) 105x35x29 mm 207 g Max. current load: 25C continuous. Charging current up to 4C. Balance connector type JST-XH. | |
1HI3042-1x Name: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: for flaps | |
0201559 Name: Alu precision spinners turbo 40/5,0/8 Price: 17,50€ Delivery status: in stock Spinner ø 40/5 mm, for blade root width 8 mm. | |
1HI3037-1x Name: HS-81 bulk 1pcs Price: 13,00€ (recommended quantity: 2 pieces) Delivery status: in stock The most popular microservo on our market! Fast microservo with plastic gears suitable for small electric motor, glider, to control the ailerons and flaps greater glider / motor glider, lower power models, the auxiliary function in larger models. Notice: for elevator & rudder | |
723946 Name: CAM CARBON Z 12x6,5" Z, 30,5x16,5cm Price: 9,20€ Delivery status: in stock Folding propeller blades, blade root width 8 mm. | |
UHU5146 Name: UHU-Por 50ml Price: 4,54€ Delivery status: in stock Notice: for gluing the servo covers | |
0167823-0,25 Name: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery | |
0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
KAV36.30090 Name: Servo Cable Twisted Thin JR 0.14mm2 (PVC) Price: 0,83€ Delivery status: in stock Twisted three-core cable in JR colors (brown / red / orange) with PVC insulation, conductor cross-section 0.14 mm2. Highly flexible, strands of 72 mm 0.05 mm, max. 48 V, 3A. Diameter 1,0 / 1,9 mm. Made in Germany. Price for 1 meter Notice: ~0,4m | |
020M3250 Name: Tool for easy insertion of the motor into the fuselage M3x250mm 2 pcs Price: 0,48€ Delivery status: in stock threaded rod M3 x 250mm, 2 pcs |
Spare parts
020106-2ARF Name: Prelude REF 2,5m Wings ARF Price: 208,50€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® | |
020106-2ARC Name: Prelude REF 2,5m Wings (uncovered - ready to cover) Price: 158,50€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Not covered. | |
020106-1 Name: Fuselage Prelude REF Price: 76,00€ Delivery status: in stock fiberglass gelcoated, length 1245 mm | |
020106-3ARF Name: Prelude REF Elevator ARF Price: 33,40€ Delivery status: in stock The package contains: elevator; fiberglass joiner Ø3mm - 150mm; iron joiner Ø2 - 70mm | |
020106-3ARC Name: Prelude REF Elevator (uncovered - ready to cover) Price: 25,00€ Delivery status: in stock The package contains: elevator; fiberglass joiner Ø3mm - 150mm; iron joiner Ø2 - 70mm | |
020106-4ARF Name: Prelude REF Rudder ARF Price: 21,60€ Delivery status: in stock Color (transparent) | |
020106-4ARC Name: Prelude REF rudder (uncovered - ready to cover) Price: 18,80€ Delivery status: in stock not covered. | |
020106-6 Name: Canopy Prelude REF Price: 13,00€ Delivery status: in stock fiberglass gelcoated | |
020106-24 Name: Prelude REF Wing joiner Price: 9,50€ Delivery status: in stock Alu wing joiner 10/8 filled with carbon | |
020106-7 Name: Prelude REF Stickers Price: 8,00€ Delivery status: in stock | |
TAPE12 Name: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
02072-1C Name: Motor mount ø 39mm Universal Price: 2,60€ Delivery status: in stock CNC cut fiberglass Ø39,2 x 3 mm | |
05028 Name: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. | |
05019 Name: Plastic servo covers Price: 2,15€ Delivery status: in stock For micro–mini servo, ø 57 mm. Notice: used previously | |
050191 Name: Plastic servo covers Ø 59mm Price: 2,15€ Delivery status: in stock For micro–mini servo, material:0,5mm, 1 pair (right, left) | |
020125-3-8 Name: Elevator horn 100° II Price: 1,50€ Delivery status: in stock Made of plastic. For Marabu | |
050125 Name: Fiberglass control horn Price: 0,80€ Delivery status: in stock 13,3x1,5x8mm Notice: for flaps | |
05070 Name: Fiberglass control horn Linea Price: 0,60€ Delivery status: in stock Fiberglass 1,5mm Notice: for rudder |
Tuning parts
020106-6C Name: Canopy Prelude REF (CARBON) Price: 17,50€ Delivery status: in stock |