Product information

Product information
Producer:Hacker Motor
Name:A10-7L kv2200
 
Category:ELECTRIC MOTORS > Brushless > Air > Hacker > Outrunner > Hacker A10 >
 
Price:47,00€ pc  
 
Item No:97100007
EAN:4250320200116
Delivery status:2 weeks
Product information:Outrunner brushless electric motor Ø21x25mm, KV2200 RPM/V, weight 20g, shaft 2mm, max. power 75W (15 sec).
Product photo
more photos...

Product description and features

The A10 motors are compact outrunner motors from our A-series and offer high efficiency at low weight. The A10 motors are available as direct drive and as gear drive for small motor and glider models. This small weight-optimized high-end direct drive is often used in motor and 3D models around 200g take-off weight.

The gearbox version is used in the HLG and RES class and is perfect for all small and light glider models up to approx. 700g take-off weight.

Accessories

You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.

Scope of delivery

1x A10-7L kv2200, aluminium prop adapter, GRP bulkhead, adapter for GWS and APC propellers, O-rings and mounting screws.

Drive Recommendations

 

A10-7L kv2200
Item no.: 97100007
Propeller GWS 6x3 GWS 7x3,5 Günther
LiPo 2S 2S 2S
Voltage [V] 7,4 7,4 7,4
Current [A] 5,9 8,2 7,0
Power [W] 41 57 49
RPM 12900 11900 12700
Controller [A] 7-12 12 12
Timing [°] 20-25 20-25 20-25

 

Specifiactions
max. power range [W] (max.15 sec.) 75
Poles 12
Idle current (I0) at 8.4V [A] 1,1
Internal resistance (Ri) [Ohm] 0,11
Recommended timing [°] 20 - 25
Switching Frequenzy [kHz] 8
Controller recommendation [A] (depending on setup) 5 - 10
Idle speed per volt (kv) 2200
Dimensions and weight
Weight [g] 20
Length [mm]/[in] 25
Outer diameter [mm]/[in] 21
Shaft diameter [mm]/[in] 2
Delivery contents
Prop Adapter Yes
Mounting cross Yes
Gold plug mm (soldered) 2
Backmount mountable shaft conversion required
Front mountable Yes