cart
download
|
| ||||||||||||||||||||||||||||
Product description and features
The 8, 10 and 14-pole outrunner motors of the A20 series are available in 4 lengths (S, M, L, XL), with a voltage range of 7.2V to 12.6V. As a result, they cover a wide range of applications from the 250g indoor model up to the 1.5kg electric glider. The A20 series is double ball bearing mounted, has an interchangeable 3mm shaft and can be front or back mounted.
The weight-optimised high-end motor A20-50 S EVO kv1088 with a weight of only 29g is ideal for indoor 3D models up to 250g
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A20-50 S EVO kv1088, accessories for front and backmount, prop driver and instructions.
Drive Recommendations
| A20-50 S EVO kv1088 | ||||||
|---|---|---|---|---|---|---|
| Item no.: 97800001 | ||||||
| Propeller | GWS 8x4,3 | APC SF 8x3,8 | ||||
| LiPo | 3S | 3S | ||||
| Voltage [V] | 10,8 | 10,8 | ||||
| Current [A] | 6,5 | 6,9 | ||||
| Power [W] | 70,2 | 74,5 | ||||
| RPM | 8383 | 8095 | ||||
| Controller [A] | 7-12 | 7-12 | ||||
| Timing [°] | 20-25 | 20-25 | ||||
| Specifiactions | |
| max. power range [W] (max.15 sec.) | max. 100 (15 Sekunden) |
| Idle current (I0) at 8.4V [A] | 0,4 |
| Internal resistance (Ri) [Ohm] | 0,232 |
| Recommended timing [°] | 20 bis 25 |
| Controller recommendation [A] (depending on setup) | 4A bis 7A Brushless |
| Idle speed per volt (kv) | 1088 U/min-1 |
| Dimensions and weight | |
| Weight [g] | 29 |
| Length [mm]/[in] | 24 |
| Outer diameter [mm]/[in] | 28 |
| Shaft diameter [mm]/[in] | 3 |
| Delivery contents | |
| Prop Adapter | Yes |
| Mounting cross | Yes |
| Gold plug mm (soldered) | 2 |
| Backmount mountable | shaft conversion required |
| Front mountable | Yes |
