cart
download
|
| ||||||||||||||||||||||||||||
Product description and features
This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for operation on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models.
This weight-optimized high-end motor with a weight of only 177g fits perfectly in and sailors up to 3kg. Easily slidable shaft. The model can be converted back to a glider within a very short time. E-flight and glider towing in alternation possible. Long free shaft with 5mm diameter, support bearing already included.
Accessories
You will find the suitable controller, batteries as well as a suitable propeller in the accessories tab.
Scope of delivery
1x A30-12 XL V4 kv700, accessories for front and rear mounting, prop driver and instructions.
Drive recommendation
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 650 |
| Poles | 14 |
| Idle current (I0) at 8.4V [A] | 1,5 |
| Internal resistance (Ri) [Ohm] | 0,034 |
| Recommended timing [°] | 20 - 25 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 55 - 70 |
| Idle speed per volt (kv) | 700 |
| Dimensions and weight | |
| Weight [g] | 205 |
| Outer diameter [mm]/[in] | 37,2 |
| Shaft diameter [mm]/[in] | 5 |
| Delivery contents | |
| Prop Adapter | Nein |
| Mounting cross | Ja |
| Gold plug mm (soldered) | 3,5 |
| Backmount mountable | Nein |
| Front mountable | Ja |
