Product information

Product information
Producer:Hitec
Name:Servo D845WP
 
Category:SERVOS > Maxi > Digital >
 
Price:124,58€ pc  
 
Item No:1HI38810
EAN:0669962368452
Delivery status:in stock at supplier
Product information:Waterproof monstrously powerful digi servo new generation in jumbo size with steel gears with electronics with a lightning fast response for heavy use. Programmable power supply 4,8-7,4V. 32,5kg.cm thrust, speed 0,26s / 60 ° in 4.8V, move 50kg.cm, speed 0,17s / 60 ° at 7.4V. Weight 227 g.
Product photo

The Mega Scale, Waterproof Duo
D840WP & D845WP  |  Estimated Street Price - $99.99

  4.8 Volts 6.0 Volts 7.4 Volts  
Model Speed Torque Speed Torque Speed Torque Part# Dimensions Weight
D840WP 0.17 sec/60º 264
oz-in		 0.14 sec/60º 333
oz-in		 0.11 sec/60º 417
oz-in		 36840 2.60 x 1.26 x 2.44 in 8.0 oz
19.0
kg-cm		 24.0
kg-cm		 30.0
kg-cm		 66.0 x 32.0 x 62.0 mm 227 g
D845WP 0.26 sec/60º 451
oz-in		 0.21 sec/60º 562
oz-in		 0.17 sec/60º 694
oz-in		 36845 2.60 x 1.26 x 2.44 in 8.0 oz
32.5
kg-cm		 40.5
kg-cm		 50.0
kg-cm		 66.0 x 32.0 x 62.0 mm 227 g

Servos of Hitec D series

New digital servos Hitec D-Series combine Ultra fast response time, accuracy and high resolution of 4096 steps a series of servos HS-8xxx with programmable servo HS-7xxx series. In fact, the existing servo far surpass thanks to a 32-bit processor and 12-bit ADCs. Additionally, they offer function? Wide Voltage? allowing the use of battery power in a wide range of nominal voltage of 4.8 to 7.4 V.

32bit MCU/12bit ADC

Hitec new 32-bit processor coupled with 12-bit analog-to-digital converter transmitting a signal from the feedback potentiometer offers the best response achieved between the servos for RC models. You can also use a universal PC interface DPC-11 (applicable to all programmable servo Hitec) to tune your servos Series D for maximum performance (the deflections, resolution, fail-safe, soft start etc.) in a wide range of applications.

Wide Voltage

Hitech technology? Wide Voltage? supports all types of receiver batteries with a nominal voltage of 4.8 to 7.4 V. This means that the servos can be powered directly eg. from four to six cell battery NiMH or NiCd, two cells LiFe, LiPo or Li-ion? Of course, it is important to remember that the thrust and speed servo depend on the supply voltage.

Soft start

Soft start protects the servo mechanism to control the rudder while turning on-board electronics - servo after turning slowly moves to the neutral position - not to have any sharp twitch

Programable functions

With a new programmer / USB interface DPC-11 can servos Series D set many parameters for the perfect fit servos your application. Servo Series D have consistently high resolution; with function? the deflection (EPA)? You can set the servo range up to 180 (a control signal with a pulse width of 0.9 to 2.1 ms). The programmable values are:reset to factory defaults
     width of the deadband (adjustable in 10 steps)
     sense of rotation
     rotational speed
     neutral
     soft start
     the deflection (180 °)
     enable or disable fail-safe
     Setting emergency deflection fail-safe
     Overload protection (power limit 0-50% Overload)

Equipments required

HFP-301HI3306
Name: HFP-30
Price: 78,75€ vložit zboží do košíku
Delivery status: in stock
Programátor digitálních serv HITEC (všech řad) a servotester. Pro programování digitálních serv HITEC sérií HS-5xxx, HS-7xxx, HSB-9xxx, Dxxx a testování všech typů serv (digitálních i analogových). Možnost synchronního programovánání dvou serv, měření šířky a střídy řídících pulsů a mnoho dalších funkcí.
DPC-11 Universal Programmer Hitec servos with PC interface (mini-USB)1HI33012
Name: DPC-11 Universal Programmer Hitec servos with PC interface (mini-USB)
Price: 16,63€ vložit zboží do košíku
Delivery status: in stock
Universal interface for PC software programmer and servo tester for all programmable servos Hitec (classic and brushless). Allows you to adjust the size of deflections, neutral, fail-safe, speed, direction of rotation, deadband, soft start.