cart
download
|
| ||||||||||||||||||||||||||||
Product description and features
This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for operation on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models.
This weight-optimized high-end motor with a weight of only 70g fits perfectly in motor models up to 1.0 kg.
Accessories
You can find the suitable controller, batteries as well as a suitable propeller in the accessories tab.
Scope of delivery
1x A30-22 S V4 kv1440, accessories for front and rear mounting, prop driver and manual.
Drive recommendation
| A30-22 S V4 kv1440 | ||||||
|---|---|---|---|---|---|---|
| Item no.: 15716111 | ||||||
| Propeller | APC 7x4 | APC 8x6 | ||||
| LiPo | 3S | 3S | ||||
| Voltage [V] | 11 | 11 | ||||
| Current [A] | 20 | 29 | ||||
| Power [W] | 221 | 319 | ||||
| RPM | 14525 | 13469 | ||||
| Controller [A] | 30 | 40 | ||||
| Timing [°] | 20-25 | 20-25 | ||||
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 250 |
| Poles | 14 |
| Idle current (I0) at 8.4V [A] | 1,4 |
| Internal resistance (Ri) [Ohm] | 0,041 |
| Recommended timing [°] | 20 - 25 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 30 - 40 |
| Idle speed per volt (kv) | 1440 |
| Dimensions and weight | |
| Weight [g] | 70 |
| Length [mm]/[in] | 28 |
| Outer diameter [mm]/[in] | 37,2 |
| Shaft diameter [mm]/[in] | 5 |
| Delivery contents | |
| Prop Adapter | Ja |
| Mounting cross | Ja |
| Gold plug mm (soldered) | 3,5 |
| Backmount mountable | Ja |
| Front mountable | Ja |
