Detail zboží

Informace o produktu
Výrobce:Hacker Motor
Název zboží:A50-14 L V4 kv300
 
Kategorie:ELEKTROMOTORY > Střídavé > Letecké > Hacker > Outrunner > Hacker A50 >
 
Cena s DPH:5150,00 ks   vložit zboží do košíku
 
Obj. číslo:15726841
EAN:4250320249122
Dostupnost:2 týdny
Popis:Střídavý elektromotor s rotačním pláštěm Ø48,7x62,2mm, KV300 ot./min na V; váha 445g, hřídel 6mm, max. výkon 1650W (15 sec).
Obrázky produktu
více foto...

Product description and features

The Hacker A50-V4 motors are 14-pole external rotor motors whose efficiency has been further improved through continuous development. The A50-V4 series has a new rear end shield with fan, which enables even more efficient internal cooling of the entire motor. The different lengths and windings allow an exact adaptation to the model and allow a power range up to 2000W.

The main range of use is for sport and scale models from 2.2 kg to 6.0 kg, for aerobatic and 3D models up to 4.0 kg take-off weight. For electric and scale gliders from 7.0 kg to approx. 15.0 kg. The A50-V4 also fits perfectly in helicopter models of the 500/550 and 600 class.

This weight-optimised high-end motor with a weight of only 445g fits perfectly in motor models up to 4kg or gliders up to 15kg.

Accessories

You will find the suitable regulator, batteries and a suitable propeller in the accessories tab.

Scope of delivery

1x A50-14 L V4 kv300, accessories for front and back mount, prop driver and instructions.

Drive recommendation

 

A50-14 L V4 kv300
Item no.: 15726841
Propeller Xoar 16x10 Xoar 17x10
LiPo 8S 8S
Voltage [V] 30 30
Current [A] 61 66
Power [W] 1840 1993
RPM 8168 7992
Controller [A] 70-80 80-90
Timing [°] 20-25 20-25

 

Specifiactions
max. power range [W] (max.15 sec.) 1650
Poles 14
Turns 14
Idle current (I0) at 8.4V [A] 1
Internal resistance (Ri) [Ohm] 0,025
Recommended timing [°] 20 - 25
Switching Frequenzy [kHz] 8
Controller recommendation [A] (depending on setup) 70 - 90
Idle speed per volt (kv) 300
Dimensions and weight
Weight [g] 445
Length [mm]/[in] 62,2
Outer diameter [mm]/[in] 48,7
Shaft diameter [mm]/[in] 6
Delivery contents
Prop Adapter Ja
Mounting cross Ja
Gold plug mm (recommended) 4
Backmount mountable Ja
Front mountable Ja