|
|
Programmable digital standard servo with titanium gear aand double BB-ed output shaft for general use in all kind of RC models - great for larger model planes, 1:10 RC cars etc. Plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-1053MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
- Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
- Servo Neutral: Servo neutral (centre) position setting.
- Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
- PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
- Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
- Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
- Reverse: Reverses the servo movement direction.
- Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
- SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
- Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
- (a) Release: No fail-safe protection.
- (b) Keep Position: Keeps the position corresponding to the last correct control signal.
- (c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
- Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
- Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-8.4 V (nominal).
25T/5.92 mm output shaft.
Servo dimensions | Standard |
Servo type | Digital |
Programmable | Yes |
Thrust at 4.8V [kg/cm] | 13 |
Thrust at 6.0V [kg/cm] | 15 |
Thrust at 7.4V [kg/cm] | 18 |
Thrust at 8.4V [kg/cm] | 20 |
Speed at 4.8V [s/60st.] | 0.23 |
Speed at 6.0V [s/60st.] | 0.21 |
Speed at 7.4V [s/60st.] | 0.2 |
Speed at 8.4V [s/60st.] | 0.17 |
Servo gears | Titanium |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 4.8 - 8.4 |
Length [mm] | 40 |
Width [mm] | 20 |
Height [mm] | 42.3 |
Weight [g] | 63 |
Intended for | Aeroplanes,On-road cars,Off-road cars,Boats |
Equipments required
KAV20.0001 Name: GO servos USB programmer Price: 24,96€ Delivery status: contact us USB programmer/interface for programming KAVAN GO digital servos of the GO-10xx/11xx/12xx series with the help of a convenient PC operating program for Windows XP, Vista, 7, 8, 10 (32/64bit). | |
KAV20.3712 Name: Servo arm Double 114mm (4,5") 25teeth M3 Price: 17,46€ Delivery status: in stock at supplier Aluminium double servo arm with offset for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 114mm ; 102mm ; 89mm ; 76,5mm ; 63,5mm. | |
KAV20.3711 Name: Servo arm Double 89mm (3,5") 25teeth M3 Price: 16,63€ Delivery status: in stock at supplier Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 89mm ; 76,5mm ; 63,5mm. | |
KAV20.3706 Name: Servo arm 51mm (2") 25teeth M3 Price: 13,71€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 36mm ; 42,5mm ; 51mm. | |
KAV20.3710 Name: Servo arm Double 64mm (2,5") 25teeth M3 Price: 13,71€ Delivery status: in stock at supplier Aluminium double servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between M3 holes: 64mm ; 50mm ; 38mm. | |
KAV20.3705 Name: Servo arm 45mm (1,75") 25teeth M3 Price: 12,04€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 45mm ; 38mm ; 32mm. | |
KAV20.3704 Name: Servo arm 38mm (1,5") 25teeth M3 Price: 11,21€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 38mm ; 32mm. | |
KAV20.3701 Name: Servo arm 32mm (1,25") 25teeth M2 Price: 10,79€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3703 Name: Servo arm 32mm (1,25") 25teeth M3 Price: 10,79€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 holes: 32mm ; 25,5mm. | |
KAV20.3702 Name: Servo arm 25mm (1") 25teeth M3 Price: 9,96€ Delivery status: in stock at supplier Aluminium servo arm for servos with 25teeth output shaft (Hitec Dxxx/HS-8xxx/HSB-9xxx, Savöx a Futaba). Made of aluminium, with M3 threads for ball links. Distance between servo shaft and M3 hole: 25mm. | |
KAV20.3915 Name: Carbon control horn 110 x 31mm Price: 6,21€ Delivery status: in stock at supplier Two-arm universal arc carbon lever for servos 110x31 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3911 Name: Carbon control horn 110 x 22mm Price: 4,13€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 110x22 mm, center hole 8 mm. For screwing onto standard plastic servo blades. | |
KAV20.3913 Name: Páka serva uhlíková jednoramenná 66 x 22,5mm Price: 3,71€ Delivery status: in stock at supplier Jednoramenná univerzální uhlíková páka pro serva 66x22.5 mm, středový otvor 7 mm. Pro našroubování na standardní plastové kotouče serv. | |
KAV20.3914 Name: Carbon control horn 40x21mm Price: 2,88€ Delivery status: in stock at supplier Single arm universal carbon servo lever 40x21 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3916 Name: Carbon control horn 53 x 20 Price: 2,88€ Delivery status: in stock at supplier Single arm universal arc carbon lever for servos 53x20 mm, center hole 9 mm. For screwing onto standard plastic servo blades. | |
KAV20.3912 Name: Carbon control horn 60 x 22,5mm Price: 2,88€ Delivery status: in stock at supplier Two-arm universal carbon lever for servos 60x22.5 mm, center hole 7 mm. For screwing onto standard plastic servo blades. | |
KAV20.3700 Name: Servoscrew M3x6 10pcs Price: 2,46€ Delivery status: contact us Screw for screwing into standard servo with metal gears to fix the lever. Hexagon socket head, black. The package is 10pcs. |
Spare parts
KAV20.1053MG.1 Name: GO-1053MG gear set Price: 8,71€ Delivery status: in stock at supplier | |
KAV20.1053MG.3 Name: GO-1053MG servo case Price: 4,96€ Delivery status: in stock at supplier | |
KAV20.1053MG.2 Name: GO-1053MG horn set Price: 1,46€ Delivery status: in stock at supplier |
Equipments required for models
8.BXR.S2.KIT Name: Buggy 4WD Hobbytech BXR.S2 stavebnice Price: 208,29€ Delivery status: in stock at supplier Závodní buggy 4WD v měřítku 1/10 na podvozku s ambicemi na vítězství. | |
NHA105 Name: CARTEN T410 RALLY 1/10 4WD stavebnice Price: 197,88€ Delivery status: in stock at supplier Rally 1/10 podvozek bez veškeré elektroniky, karoserie. |