|
|
This model is a must for chasing thermals and designed from the start for electric flight.
The flaps enable the model to be perfectly balanced during winching, to ride out the rough weather easily, to maximise lift while spiralling and they act as powerful airbrakes to help land the model at your feet even in the most difficult conditions.
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
Technical specification:
|
|
|
|
|
|
|
RC equipment: 4 channel with 6 servos
Kit contents:
- Light fuselage (carbon reinforced) moulded in white tinted epoxy fiberglass
- Blue gelcoated fiberglass canopy
- Three-piece wing is made in balsa framework with torsing box controlled by the ailerons and flaps
- The tailplane are made in a balsa framework
- An exclusive stabiliser tilt mechanism
- Top quality accessories (servo covers, servo mount, rods, ending ties, control horns, tape for sticking flaps, wing joiners fiberglass motor mount,...)
- Complet assembly manual with step by step illustrations
Equipments required
JSP-66 Name: SPIN 66 PRO Price: 127,10€ Delivery status: in stock SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of BEC for models operating at higher voltages. A significant factor is that the BEC circuit maintains its full current capability right up to the maximum voltage. Notice: for Mega ACn 22/3S | |
20222503E Name: Mega ACn 22/3S Price: 99,00€ Delivery status: in stock Brushless electric motor Ø36mm x 48,5mm, KV1150 rpm on V, weight 189g, max. current 70A, shaft Ø5mm. Notice: more powerful motor | |
02070-PO Name: Transport bags for Linea Price: 73,00€ Delivery status: in stock Bags for wings, elevator and rudder. | |
2462 Name: Accu LiPol Xpower 2700-3S ECO 25C Price: 37,46€ Delivery status: in stock 2700-3S ECO-S (11,1V) 105x35x29 mm 207 g Max. current load: 25C continuous. Charging current up to 4C. Balance connector type JST-XH. | |
020D1816 Name: Servo DYMOND D60/TOPMODEL 1816 Price: 34,96€ Delivery status: in stock Slim Servo (9 g) nylon gear. The thickness of only 9 mm allows installation into the wings with a very slim profile. Supply voltage 3.6 to 8.4 V allows in addition to the normal supply also use 1 or 2 LiPo. Notice: for elevator | |
1HI3042-1x Name: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 5 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: for flaps, ailerons & rudder | |
0201559 Name: Alu precision spinners turbo 40/5,0/8 Price: 17,50€ Delivery status: in stock Spinner ø 40/5 mm, for blade root width 8 mm. | |
723957 Name: CAM CARBON 13x8" Z, 33x20cm Price: 9,60€ Delivery status: in stock Folding propeller blades, blade root width 8 mm. Notice: for Mega ACn 22/3S | |
02072-7 Name: Linea stickers Price: 9,60€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Linea 2,56m wingspan. | |
UHU5146 Name: UHU-Por 50ml Price: 4,54€ Delivery status: in stock Notice: for gluing the servo covers | |
020MPXORIGINAL Name: MPX M6 ORIGINAL MULTIPLEX connector 1 pair Price: 3,65€ (recommended quantity: 2 pieces) Delivery status: in stock MPX konektor, 1 pár. Originální konektor měmeckého výrobce - toto není čínská náhražka. | |
Nes001 Name: MPX 6 connector holder Price: 2,40€ (recommended quantity: 2 pieces) Delivery status: in stock For MPX 6 connectors 1 pair + 4x Screw | |
0167823-0,25 Name: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery | |
0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
8GR3009 Name: Servo Cable Twisted Thick JR 0.25mm2 Price: 1,04€ Delivery status: in stock Twisted Servocable (three-row) 0,25mm². Price per common meter. 1 m Weight 13 grams. Notice: ~ 2,6 m | |
020M3250 Name: Tool for easy insertion of the motor into the fuselage M3x250mm 2 pcs Price: 0,48€ Delivery status: in stock threaded rod M3 x 250mm, 2 pcs |
Spare parts
02072-2ARF Name: Linea 2,56m Wings ARF Price: 250,20€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® | |
02072-2ARC Name: Linea 2,56m Wings (uncovered - ready to cover) Price: 240,50€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Not covered. | |
02072-1 Name: Fuselage Linea elektro Price: 67,00€ Delivery status: in stock fiberglass gelcoated, length 1145mm | |
02072-3ARF Name: Linea elevator ARF Price: 29,90€ Delivery status: in stock | |
02072-3ARC Name: Linea elevator (uncovered - ready to cover) Price: 21,50€ Delivery status: in stock not covered. | |
02072-4ARF Name: Linea rudder ARF Price: 18,80€ Delivery status: in stock | |
02072-4ARC Name: Linea rudder (uncovered - ready to cover) Price: 15,30€ Delivery status: in stock | |
02070-6 Name: Canopy Linea Price: 13,00€ Delivery status: in stock fiberglass blue gelcoated | |
TAPE12 Name: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
02072-1C Name: Motor mount ø 39mm Universal Price: 2,60€ Delivery status: in stock CNC cut fiberglass Ø39,2 x 3 mm | |
05028 Name: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. | |
05018 Name: Plastic servo covers Price: 2,15€ Delivery status: in stock For mini servo, ø 65 mm. | |
02033-3S.1 Name: Anti-slip mat of horizontal stabilizer (Thermik Dream, Linea...) 2pcs Price: 1,60€ Delivery status: in stock Self-adhesive anti-slip mat for elevators: Diva, Thermik Dream, Manta, Electra, Linea. Material: sandpaper 800, size 62x23mm. Package content: 2pcs. | |
02072-4-3 Name: Steven Linea Price: 1,60€ Delivery status: in stock material: plywood 4mm | |
02033-3S Name: Floating elevator bed big Price: 1,40€ Delivery status: in stock Plastic pressing for floating elevator models Diva, Thermik Dream, Manta, Electra, Electra Pro, Linea, Linea electro. | |
02072-24 Name: Linea Wing joiner 2Pcs. Price: 1,40€ Delivery status: in stock Steel Ø5mm, length 144mm. | |
050701 Name: Fiberglass control horn Linea Price: 0,80€ Delivery status: in stock Dimensions: 21 x 1,5 x 11 mm Notice: for rudder | |
050702 Name: Fiberglass control horn Linea Price: 0,70€ Delivery status: in stock Fiberglass 1,5mm Notice: for flaps | |
05070 Name: Fiberglass control horn Linea Price: 0,60€ Delivery status: in stock Fiberglass 1,5mm Notice: for ailerons |
Tuning parts
02070-6C Name: Canopy Linea (CARBON) Price: 17,50€ Delivery status: in stock |
Similar products
02070ARF Name: Linea Price: 317,00€ Delivery status: in stock Performance sailplane with flaps. Wingspan 2,56 m. |