|
|
This is an absolutely superb modern acrobatic monoplane, extremely lightweight with a huge cowl to absorb powerful engines.
Stacks or temperament, but easy to pilot – a fantastic aerobatic machine!
If you are interested in a different color combination than we offer, please contact us.
Technical specification:
|
|
|
|
|
|
|
|
*engine: 20–30 ccm
Engines, e.g.:
- OS MAX GT-33 with E-5030 silencer
- DUALSKY Xmotor XM6360EA-11 V3 + 6S Li-Po
RECOMMENDED SERVOS |
4,8V |
7,4V |
AILERONS 2X | HS-645 MG (Hitec) | HS-5496 MH (Hitec) |
ELEVATOR 1x | HS-645 MG (Hitec) | HS-5496 MH (Hitec) |
RUDDER 1x | HS-645 MG (Hitec) | HS-5496 MH (Hitec) |
ENGINE 1x | HS-485 HB (Hitec) | HS-430BH (Hitec) |
Kit contents:
-
The fuselage, motor cowl and cockpit interior are of epoxy grp with a gel-coat finish
-
Large transparent PVC canopy
-
Wings and tail (2 part) are open structure balsa covered with Oracover
-
The wing and tail joiners are aluminium
-
The undercarriage is from pre-bent aluminium
-
The wheel spats are epoxy grp with a red gel-coat finish
-
Accessories
-
Instructions
Equipments required
OS38300 Name: GT-33 včetně tlumiče E-5030 Price: 445,42€ Delivery status: in stock at supplier Letecký benzínový motor s obsahem 32,98ccm s výkonem 3,85 koně při 9000o/min., volnoběžné otáčky 1800ot./min, váha motoru 984g, váha výfuku 160g, váha zapalování 105g určené i pro 2čl. LiPo a Life provoz. | |
MAV0002 Name: IBEX 130HV Opto ESC Price: 282,92€ Delivery status: in stock at supplier Programmable telemetric brushless electronic speed OPTO controller for model aeroplanes. Continuous current 130A (peak 180A), input voltage 4-12S LiPo, OPTO controller wihout BEC, weight 110g, dimensions 58x38x28mm. Compatible w. telemetry systems JETI Duplex EX, Futaba S.BUS2, Multiplex MSB, Graupner Hott, PowerBox P2Bus, Spektrum SRXL2. Programmable w. JETIBOX or MAV Sense PC USB interface. | |
1686 Name: Xmotor XM6360EA-11 V3 Price: 181,21€ Delivery status: in stock at supplier Outrunner brushless electric motor. Ø63.1mm x 63mm, RPM 380/1V, weight 650g, Max. 130A (15S), input voltage Lixx 6-8s, shaft 8 mm. | |
KAV33.6074 Name: KAVAN - Li-Po 5000mAh/22,2V 60/120C, 111Wh Price: 145,42€ Delivery status: in stock at supplier 60/120C Ultra high performance LiPo battery pack for the most demanding applications, charge rate 2C. Six-cell 6s1p 22.2V 5000mAh. Dimensions: 163x45x44mm, weight: 718g, JST-XH balance connector. | |
1HI3193 Name: HS-5496 MH HiVolt DIGITAL Price: 39,54€ (recommended quantity: 4 pieces) Delivery status: in stock 52 g standard digital servo with metal gears, Torque 6.0 / 7.2 kg / cm and a speed of 0.17 / 0.15 s/60st. or at 6V. 7.4 V. Servo HiVolt belongs to the series and can be powered with 2 of Article LiPo (7.4 V). Colour: Notice: 7,4V for: 2x ailerons, 1x elevator, 1x rudder | |
1HI3115-1x Name: HS-645 MG bulk 1pc unpacked Price: 34,00€ (recommended quantity: 4 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 2x ailerons, 1x elevator, 1x rudder | |
KAV50.1.2010 Name: Wooden propeller KAVAN 20x10 2-blade natural Price: 31,63€ Delivery status: in stock at supplier KAVAN high-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving low noise propellers. Whether you mount them on a "glow plug" or "gasoline" your KAVAN propeller is your choice to "hold" your aerobatic model or dummy in the air! KAVAN propellers are designed and manufactured in the Czech Republic. Notice: for the engine Dualsky XM6360EA-11 V3 | |
PI-2600A-2S1P Name: POWER ION 2600A 2S1P Price: 27,10€ Delivery status: 1 week Notice: receiver battery | |
1HI3085 Name: HS-485 HB Price: 24,96€ Delivery status: in stock Standard servo with 45 g Carbon gears for general use. 1xBB, Torque 4.8 kg / cm, Speed 0.22 to 4.8 V. s/60st Notice: 4,8V for: 1x engine | |
KAV50.1.1810 Name: Wooden propeller KAVAN 18x10 2-blade natural Price: 24,54€ Delivery status: in stock at supplier KAVAN high-quality wooden propellers were constructed with the help of the latest software and are produced using the newest and most advanced CNC machines. Their profile and shape are optimized to ensure high efficiency throughout the range of operating speeds. The unique shaping of the leaf ends contributes to achieving low noise propellers. Whether you mount them on a "glow plug" or "gasoline" your KAVAN propeller is your choice to "hold" your aerobatic model or dummy in the air! KAVAN propellers are designed and manufactured in the Czech Republic. Notice: for the engine OS MAX GT-33 | |
020CT100 Name: Fiberglass spinner Ø100mm Price: 23,30€ Delivery status: in stock ø 100 mm, length 119 mm, weight: 92 g, CAP 232 :3,5 | |
KAV50.1021 Name: Gas fuel tank 500ml Price: 19,13€ Delivery status: in stock | |
1HI3082 Name: HS-430 BH, Hi Volt Price: 17,88€ Delivery status: in stock Standard Servo 45.5 grams of plastic gears,Torque 4.1 / 5.0 kg / cm and a speed of 0.16 / 0.14 s/60st. or at 6V. 7.4 V. Servo HiVolt belongs to the series and can be powered with 2 of Article LiPo (7.4 V) Notice: 7,4V for: 1x engine | |
0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
Spare parts
02016-2ARF Name: CAP 222/GILES 202 HONDA wings ARF Price: 325,30€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® colours: top side/ bottom side | |
02067-2ARC Name: GILES 202 wings (uncovered - ready to cover) Price: 275,20€ Delivery status: in stock Part of the wing is small accessories for installation of servos. | |
02016-1 Name: Fuselage CAP 222/ GILES 202 HONDA Price: 250,00€ Delivery status: in stock fiberglass gelcoated | |
02016-9 Name: Engine cowl Cap 222/GILES 202 HONDA Price: 46,00€ Delivery status: in stock fiberglass gelcoated, weight cca 150g. | |
02016-4ARF Name: CAP 222/GILES 202 HONDA rudder ARF Price: 41,70€ Delivery status: in stock | |
02016-3ARF Name: CAP 222/ GILES 202 HONDA elevator ARF Price: 41,00€ Delivery status: in stock colours: top side/ bottom side | |
02016-5 Name: Canopy frame CAP 222/ Giles 202 Price: 39,00€ Delivery status: in stock | |
02016-101 Name: Main landing gear CAP 222/ GILES 202 Price: 37,80€ Delivery status: in stock aluminium | |
02016-8 Name: Wheel covers Cap 222 Price: 37,00€ Delivery status: in stock Mounting for aluminium undercarriage. Wheel max. ø 90 mm. Dimensions: length 230 mm, width 45 mm, height 75 mm. Material: fiberglass gelcoated. Price per pair. | |
02016-6 Name: Canopy Cap 222/GILES 202 Price: 34,00€ Delivery status: in stock PVC transparent | |
020100TW02 Name: Carbon rear tailwheel for 100cc spring controlled Price: 34,00€ Delivery status: in stock Carbon tailwheel system for 100cc spring controlled. Base: 4 mm carbon, wheel: ⌀45 mm Pu with aluminum center, weight including springs: 45 g. | |
02067-3ARC Name: GILES 202 elevator (uncovered - ready to cover) Price: 33,00€ Delivery status: in stock | |
02067-4ARC Name: GILES 202 rudder (uncovered - ready to cover) Price: 25,50€ Delivery status: in stock | |
02016-24 Name: CAP 222/ GILES 202 wing joiner Price: 21,40€ Delivery status: in stock ø 26, lenght 765mm | |
02067H-7 Name: Giles 202 HONDA stickers Price: 17,00€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Giles 202 HONDA 1,94m wingspan. | |
KAV0102 Name: SuperLight Deluxe AirWheels 75mm, 1 pair Price: 9,54€ Delivery status: in stock Super light wheel for 4mm shaft, 75mm diameter, width 29mm, weight 26g. | |
02016-4-3 Name: Steven for CAP 222/GILES 202 Price: 2,90€ Delivery status: in stock | |
190124827 Name: Cabin latch Price: 2,70€ Delivery status: in stock from steel + plastic | |
02016-3-3 Name: CAP 222/ GILES 202 elevator joiner Price: 2,60€ Delivery status: in stock ø 12, lenght 260mm | |
0204008 Name: PVC coated steel wire 0,75 mm Price: 2,39€ Delivery status: in stock Price per 1m | |
2502 Name: Pinned hinge 16x32 mm 6pcs Price: 1,84€ Delivery status: in stock The workmanship of the pinned hinge with the steel pin and six throughholes allows free movement with minimal passive resistance and a secure mounting with cyanoacrylate or epoxy glue into the wing, or if need be into the rudder and elevator of the model. The hinges are delivered mounted. 6pcs | |
050161 Name: Fiberglass control horn Price: 1,30€ Delivery status: in stock For big models. Dimensions: 45×2×32 mm Notice: for ailerons | |
05036 Name: Fiberglass control horn CAP222 Price: 1,30€ Delivery status: in stock Dimensions: 18,0×2,0×30,0 mm Notice: for elevator | |
05037 Name: Fiberglass control horn CAP222 Price: 1,30€ Delivery status: in stock Dimensions: 28,0×2,0×43,0 mm Notice: for rudder | |
05041 Name: Fiberglass control horn Price: 0,80€ Delivery status: in stock Dimensions: 12,3×1,5×34,4 mm | |
2710 Name: Large aileron pushrod exit 2pcs Price: 0,76€ Delivery status: in stock For aerodynamically clean out rods in the wing or fuselage of the model, suitable for wire diameter 2 mm. Available in black and white. 2pcs | |
0205719400886 Name: hook 25mm Price: 0,30€ Delivery status: in stock | |
02016-103 Name: Tailwheel 35mm CAP, Aggressor, Razzia, Miss Morava, Miss Tractor Delivery status: contact us For aircraft from 5 to 8 kg T/O weight. Wheel Ø 35 mm. Wheel mounted on a ø 3 mm steel wire with a CNC machined horn. Delivered complete with wheel already mounted and 2 springs. Alu skid thickness 3mm. |