|
|
KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.
Motor Designation System: PRO xxYY-zzzz |
PRO - brushless outrunner electric motor |
xx - motor diameter in mm |
YY - motor length in mm |
zzzz - revolution per minute per Volt (RPM/V), “KV“ |
KAVAN PRO 2225-1600
KAVAN PRO 2225-1600 is a small diameter miniature motor for lightweight model aeroplanes up to 450 g all-up weight powered by 2-3S LiPo flight battery pack. The motor has been specially designed with slim fuselage 2M E-RES contest gliders like KAVAN MIRAI or MIRAI V in mind. It could also be used for “electrification” of rubber powered planes from of Guillow’s or Dumas kits (up to 1200 mm wingspan), it works great with indoor models, Dumas RC park-flyer kits and similar.
Motor installation: KAVAN 2225-1600 has been designed for the front mount installation only. Use at least two (opposite) or four M2.5 screws; these may not go deeper than 3-4 mm into the front case. The firewall should be made of 2.0 mm plywood.
The motor set contents: KAVAN PRO 2225-1600 motor w. cables (no connectors). The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual
Powering LiXX cells | 2 - 3 |
RPM/V [ot./min/V] | 1600 |
Max. power (180 s) [W] | 220 |
Internal resistance [mOhm] | 106 |
Open-circuit current (při 10 V) [mA] | 620 |
Max. peak current (180 s) [A] | 23 |
Diameter [mm] | 22 |
Length [mm] | 25 |
Length celková [mm] | 40 |
Shaft diameter [mm] | 3 |
Weight [g] | 34.5 |
Poles count | 14 |
Timing [°] | 15 - 25 |
ESC [A] | 25 - 30 |
Weight of glider (up-to) [g] | 450 |
Weight of trainer (up-to) [g] | 450 |
Weight of acrobat (up-to) [g] | 400 |
Weight of 3D (up-to) [g] | 330 |
Equipments required for models
KAV02.8021 Název zboží: KAVAN Mirai glider kit Price: 203,75€ Delivery status: contact us A builder's kit of high performance thermal glider/motor glider of 1995mm wingspan. To be powered by 150–200W brushless motor. With a normal tail. Very light all-balsa wing, balsa fuselage, carbon tail boom. Rudder, elevator and airbrake control. The kit includes fuselage parts for both glider and electric versions. | |
KAV02.8022 Název zboží: KAVAN Mirai V-tail glider kit Price: 203,75€ Delivery status: contact us A builder's kit of high performance thermal glider/motor glider of 1995mm wingspan. To be powered by 150–200W brushless motor. With a V-tail. Very light all-balsa wing, balsa fuselage, carbon tail boom. Rudder, elevator and airbrake control. The kit includes fuselage parts for both glider and electric versions. | |
KAV02.8020 Název zboží: RESCO glider kit 1990mm Price: 182,92€ Delivery status: contact us Kit of high performance thermal glider with span of 1990mm category F3-RES 2M in plaster. Very light classic all-balsa construction, fuselage with balsa gondola and light plywood with carbon tail beam. Controlled rudder, elevator and aerodynamic brake. |