|
|
The Mega Scale, Waterproof Duo
D840WP & D845WP | Estimated Street Price - $99.99
4.8 Volts | 6.0 Volts | 7.4 Volts | |||||||
Model | Speed | Torque | Speed | Torque | Speed | Torque | Part# | Dimensions | Weight |
D840WP | 0.17 sec/60º | 264 oz-in |
0.14 sec/60º | 333 oz-in |
0.11 sec/60º | 417 oz-in |
36840 | 2.60 x 1.26 x 2.44 in | 8.0 oz |
19.0 kg-cm |
24.0 kg-cm |
30.0 kg-cm |
66.0 x 32.0 x 62.0 mm | 227 g | |||||
D845WP | 0.26 sec/60º | 451 oz-in |
0.21 sec/60º | 562 oz-in |
0.17 sec/60º | 694 oz-in |
36845 | 2.60 x 1.26 x 2.44 in | 8.0 oz |
32.5 kg-cm |
40.5 kg-cm |
50.0 kg-cm |
66.0 x 32.0 x 62.0 mm | 227 g |
Servos of Hitec D series
New digital servos Hitec D-Series combine Ultra fast response time, accuracy and high resolution of 4096 steps a series of servos HS-8xxx with programmable servo HS-7xxx series. In fact, the existing servo far surpass thanks to a 32-bit processor and 12-bit ADCs. Additionally, they offer function? Wide Voltage? allowing the use of battery power in a wide range of nominal voltage of 4.8 to 7.4 V.
32bit MCU/12bit ADC
Hitec new 32-bit processor coupled with 12-bit analog-to-digital converter transmitting a signal from the feedback potentiometer offers the best response achieved between the servos for RC models. You can also use a universal PC interface DPC-11 (applicable to all programmable servo Hitec) to tune your servos Series D for maximum performance (the deflections, resolution, fail-safe, soft start etc.) in a wide range of applications.
Wide Voltage
Hitech technology? Wide Voltage? supports all types of receiver batteries with a nominal voltage of 4.8 to 7.4 V. This means that the servos can be powered directly eg. from four to six cell battery NiMH or NiCd, two cells LiFe, LiPo or Li-ion? Of course, it is important to remember that the thrust and speed servo depend on the supply voltage.
Soft start
Soft start protects the servo mechanism to control the rudder while turning on-board electronics - servo after turning slowly moves to the neutral position - not to have any sharp twitch
Programable functions
With a new programmer / USB interface DPC-11 can servos Series D set many parameters for the perfect fit servos your application. Servo Series D have consistently high resolution; with function? the deflection (EPA)? You can set the servo range up to 180 (a control signal with a pulse width of 0.9 to 2.1 ms). The programmable values are:reset to factory defaults
width of the deadband (adjustable in 10 steps)
sense of rotation
rotational speed
neutral
soft start
the deflection (180 °)
enable or disable fail-safe
Setting emergency deflection fail-safe
Overload protection (power limit 0-50% Overload)
Equipments required
1HI3306 Name: HFP-30 Price: 78,75€ Delivery status: in stock Programátor digitálních serv HITEC (všech řad) a servotester. Pro programování digitálních serv HITEC sérií HS-5xxx, HS-7xxx, HSB-9xxx, Dxxx a testování všech typů serv (digitálních i analogových). Možnost synchronního programovánání dvou serv, měření šířky a střídy řídících pulsů a mnoho dalších funkcí. | |
1HI33012 Name: DPC-11 Universal Programmer Hitec servos with PC interface (mini-USB) Price: 16,63€ Delivery status: in stock Universal interface for PC software programmer and servo tester for all programmable servos Hitec (classic and brushless). Allows you to adjust the size of deflections, neutral, fail-safe, speed, direction of rotation, deadband, soft start. |