|
|
The Q80-M is rised to an important player in Hacker Motor segment. Ideal for for 3D / aerobatic models with ~ 2.2 -2,3m span and up to ~ 8 (Aerobatics 10) kg weight. Also in scale models to ~ 17kg or fast WW2 models to 13kg, the motor makes a good figure.
The new Propadapter with 30mm bolt circle and 4 x M5 screws transmits the high torque of Q80 perfectly to the Prop.
Technical Data:
Powerrange | max. 5500W (15 sec.) | |
Idle current bei 8,4V | 1,3A | |
Resistance | 0,015 Ohm | |
Kv | 160 | |
Weight ~ | 1035g | |
Diameter | 89 mm | |
Lenght (Backmount - Prop) | 80 mm | |
Pole | 28 | |
recommend ESC | MasterSpin 170 OPTO | |
recommend Timing | 25-30° | |
Shaft | 10mm |
Specifiactions | |
max. power range [W] (max.15 sec.) | 5500 |
Poles | 28 |
Turns | 9 |
Idle current (I0) at 8.4V [A] | 1,3 |
Internal resistance (Ri) [Ohm] | 0,015 |
Recommended timing [°] | 25 - 30 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 140 - 300 |
Idle speed per volt (kv) | 160 |
Dimensions and weight | |
Weight [g] | 1035 |
Length [mm]/[in] | 80 |
Outer diameter [mm]/[in] | 89 |
Delivery contents | |
Prop Adapter | Ja |
Mounting cross | Ja |
Gold plug mm (recommended) | 5,5 - 8 |
Backmount mountable | Ja |
Front mountable | Nein |