|
|
The Q100-6M fits perfect to electric powered large rc-models. Ideal for 3D / aerobatic models up to ~ 20kg weight. Also in scale models up to ~ 25kg , the motor makes a good figure.
The new Propadapter with 34mm bolt circle and 6 x M5 screws transmits the high torque of Q100 perfectly to the Prop.
Technical Data:
Powerrange | max. 9300W (15 sec.) | |
Idle current bei 8,4V | 3,16A | |
Resistance | 0,0049 Ohm | |
Kv | 168 | |
Weight ~ | 1830g | |
Diameter | 113 mm | |
Lenght (Backmount - Prop) | 95,5 mm | |
Pole | 28 | |
recommend ESC | MasterSpin 220 OPTO | |
recommend Timing | 25° | |
Specifiactions | |
max. power range [W] (max.15 sec.) | 9300 |
Poles | 28 |
Turns | 6 |
Idle current (I0) at 8.4V [A] | 3,57 |
Internal resistance (Ri) [Ohm] | 0,0049 |
Recommended timing [°] | 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 220 - 300 |
Idle speed per volt (kv) | 168 |
Dimensions and weight | |
Weight [g] | 1830 |
Length [mm]/[in] | 95,5 |
Outer diameter [mm]/[in] | 113 |
Delivery contents | |
Prop Adapter | Ja |
Mounting cross | Ja |
Gold plug mm (recommended) | 5,5 - 8 |
Backmount mountable | Ja |
Front mountable | Nein |