Product information
Product description and features
The high-end glider drive made in Germany! Easily and efficiently with the proven cooling system from the F3A competition area.
With a special 6mm output shaft for sail models to accommodate the usual spinner / center piece combinations. It is attached to the motor bulkhead using 4x M3 with a 30mm lock circle.
Technical data:
- Power range max. 2200W (typical sailor switch-on times)
- No-load current at 8.4V 2.93A
- Internal resistance 0.0084 Ohm
- Idle speed per volt 2430 rpm
- Weight 423g
- Outside diameter 43.2 mm
- Length 91 mm
- Controller recommendation MasterSpin 99
- Recom. Timing 0 ° - 5 °
- Gear reduction ratio 6.7: 1
- Shaft diameter 6 mm (length 22mm)
Measured values??
Propeller |
Drive battery |
Voltage [V] |
Current [A] |
Speed ??[RPM] |
Power [W] |
RFM 17x10 |
6S |
22 |
77 |
7670 |
1694 |
RFM 17x13 |
6S |
22 |
93 |
7520 |
2046 |
Scope of delivery:
1 C50-9 L 6.7: 1 Glider Competition motor / gear unit, 1 special gear grease and instructions
Specifiactions |
max. power range [W] (max.15 sec.) |
2200 |
Poles |
2 |
Turns |
9 |
Idle current (I0) at 8.4V [A] |
2,93 |
Internal resistance (Ri) [Ohm] |
0,0084 |
Gear reducing |
6,7 : 1 |
Recommended timing [°] |
0 - 5 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
80 - 125 |
Leerlaufdrehzahl pro Volt (kv) ohne Getriebe |
2430 |
Dimensions and weight |
Weight [g] |
423 |
Length [mm]/[in] |
101,7 |
Outer diameter [mm]/[in] |
43,2 |
Shaft diameter [mm]/[in] |
6 |
Delivery contents |
Prop Adapter |
Nein |
Mounting cross |
Nein |
Gold plug mm (soldered) |
4 |
Backmount mountable |
Nein |
Front mountable |
Ja |
|