cart
download
|
| ||||||||||||||||||||||||||||||
Technical specification:
| Wingspan | Length | Flying weight | Wing area | Wing loading | Airfoil | Controlled functions |
|---|---|---|---|---|---|---|
| 1000mm | 700mm | 0,65-0,75kg | 13,4g/dm2 | 48,5-56g/dm2 | Special |
Motor, 2x ailerons, elevator |
The Still Racer is a great little machine to enjoy fast flying.
The airfoil used as well as the concepts applied give the model a excellent flight characteristics and high performance. Thanks to aerodynamically clean airframe the model has a surprising shallow glideslope.
Still racer has carbon-reinforced fiberglass fuselage, polystyrene/balsa wing, structural elevator with carbon spar and leading edge and therefore is agile and break-resistant enough to be capable of aerobatics.
Do you want to race with your friends and don´t want to invest a lot of money in speed specials? Race in your club. Still Racer directly calls you to create a club category. Create it! Buy the Still Racer, use the same power unit and battery and go to the airport to compete.
This model is manufactured in the Czech Republic. Spare parts are in stock.
The kit contains:
- light fiberglass fuselage reinforced with carbon
- one-piece polystyrene-balsa wing with ailerons, locally reinforced with fiberglass (uncovered)
- light structural balsa elevator with carbon spar and leading edge (uncovered)
- top quality accessories (servo covers, servo mount, rods, ending ties, control horns, tape for sticking flaps, fiberglass motor mount,..)
- complete assembly manual with step by step illustrations
Recommended RC equipment:
2 micro servos for ailerons SAVOX SH-0255MG or DYMOND D60
1 micro servo for elevator (Hitec HS 53MG)
Motor: ø28mm Inrunner MEGA ACn 16/25/1,5S*
Controller: 45-55A ( e.g. SPIN 55, XReg60 )
Spinner: ø 30/3,2mm
Propeller: CAM SPEED PROP 12x12 cm
Accu: 3S LiPol 2,2Ah
Equipments required
 | 201625015S* Name: Mega ACn 16/25/1,5S* Price: 99,00€  Delivery status: in stock Brushless electric motor Ø28mm x 46,4mm, KV2990 rpm on V, weight 115g, max. current 40A, shaft Ø3,2mm. |
 | HW30215100 Name: Platinum Pro 60A V4 Price: 74,58€ Delivery status: in stock Nejvyšší řada regulátorů firmy Hobbywing pro letecké aplikace. Tato verze je vhodná pro vrtulníky řady 450-480 a menší modely letadel. Spínaný BEC 5-8V 7A. Trvalý proud 60A, špičkový 80A. Napájení 3-6S LiPol. Hmotnost 49g. Rozměry 48x30x15,5mm. |
 | 020133-PO Name: Transport bags for Still Racer Price: 49,00€ Delivery status: in stock Bags for wings and elevator. |
 | 3445 Name: Accu LiPol Xpower 2200-3S HED (50C) Price: 43,29€ Delivery status: in stock 2200-3S (11,1V), 108x34x23 mm, 170g Max. current load: 50C burst; Charging current up to 5C. Balance connector type JST-XH. |
 | SAVOX-SH0255MG Name: SH-0255MG+ Digitální servo (3,9 kg-0,13s/60°) Price: 24,13€ (recommended quantity: 2 pieces) Delivery status: in stock Digitální micro servo s stejnosměrným motorem a kovovými převody, 1x kuličkové ložisko, 3,1/3.9kg při 4,8/6,0V a 0,16/0,13s na 4,8/6,0V, váha 15,8g, 22,8x12x29,4mm. Provozní napětí 4,8 - 6,0V. Notice: for: 2x ailerons |
 | 1HI30123-1x Name: HS-53 BULK 1pc Price: 13,60€ Delivery status: in stock Pikoservo 8 grams of plastic gears with increased thrust for a small electric motor. 1.5 kg.cm thrust, speed 0,14s / 60 ° at 4.8 V, respectively. 1.9 kg.cm and 0,111s / 60 ° at 6 V. Dimensions 22,8x11,6x22,6 mm. Notice: for: 1x elevator |
 | 7020 Name: Alu precision spinners for standard props electro Ø 30/3,2/M5 Price: 7,20€ Delivery status: in stock Spinner Ø 30/3,2 mm. |
 | 020133-7 Name: Still Racer stickers Price: 5,20€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Still wingspan. |
 | UHU5146 Name: UHU-Por 50ml Price: 4,54€ Delivery status: in stock Notice: for gluing the servo covers |
 | 1361.12.12 Name: CAM SPEED PROP 12x12cm/4,7x4,7 Price: 2,71€ Delivery status: in stock Plastic prop Graupner filled with carbon fibers for direct drive high speed (models for racing around pylons). Bore 4.8 / 6.1 mm. |
 | 0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. |
 | 0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
Spare parts
 | 020133-2ARF Name: Still Racer wings ARF Price: 88,00€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® |
 | 020133-2ARC Name: Still Racer wings (uncovered - ready to cover) Price: 79,20€ Delivery status: in stock Part of the wing is small accessories for installation of servos. |
 | 020133-1 Name: Fuselage Still Racer Price: 56,00€ Delivery status: in stock fiberglass , length 650mm. |
 | 020133-3ARF Name: Still Racer elevator ARF Price: 23,60€ Delivery status: in stock Package contains: elevator, 1x fiberglass lever 020133-3-8 |
 | 020133-3ARC Name: Still Racer elevator (uncovered - ready to cover) Price: 16,70€ Delivery status: in stock Package contains: elevator, 1x fiberglass lever 020133-3-8 |
 | 05025 Name: Wing servo mounts 9 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 9 mm, delivered in double pairs. |
 | 05018-6 Name: Plastic servo covers Price: 2,15€ Delivery status: in stock For micro servo, ø 58 mm, material:0,5mm, weight: 4g. |
 | 02040-1C Name: Motor mount ø 29,4mm Stinger Price: 1,60€ Delivery status: in stock CNC cut fiberglass, ø 29,4×2 mm |
 | 1022 AL Name: Mounting nut M4-low 4pcs Price: 1,56€ Delivery status: in stock Fixing nut low alloy mounting glue, thread M4. 4pcs |
 | 2764 BR Name: SNAP screw-lock pushrod connector 1 mm dia 2pcs Price: 1,48€ Delivery status: in stock They are designed for tight adjustable connection between pushrod and servo horn without soldering. Available in three different styles: SNAP type - recommended for direct use in 1,5 mm hole (MPJ 2758- 2759) or 1 mm (MPJ 2764-2765). The mount is very easy (only the push of Quicklock washer) but dismount is very difficult. Notice: for elevator |
 | 020133-2-8 Name: Fiberglass control horn Still Racer for ailerons Price: 1,00€ Delivery status: in stock Fiberglass 1,5mm. |
 | 1310 Name: Nylon bolts M4x20 4pcs Price: 0,88€ Delivery status: in stock Designed to strengthen bearing surfaces, cowlings, etc. Available in black or white. 4pcs |
 | 020133-2-31 Name: Still Racer nut washer Price: 0,80€ Delivery status: in stock plywood 3 x 20 x 47mm |
 | 020133-3-8 Name: Fiberglass control horn Still Racer for elevator Price: 0,70€ Delivery status: in stock Fiberglass 1,5mm. |
 | 2110 Name: Plastic clevis LITTLE, l=23, slot width 1,6, pin o 1,6, M2 (2pcs) Price: 0,64€ Delivery status: in stock Clevis with a special metal pin. L=23mm, pin Ø1,6, M2. Available in black and white. Notice: clevis for push rod ailerons |
 | 2016 BR Name: Clutch M2, pr.1,3 - economy (external pr.3, l = 22 mm) 2 pcs Price: 0,56€ Delivery status: in stock For fixed connection fork or ball joints with a wire rod end. Solder assembly, in the case of Bowden cable or pressing down. Material high strength brass, cut thread. 2pcs Notice: for ailerons |
 | terc50 Name: target Ø50mm stickers Price: 0,25€ Delivery status: in stock Notice: servo cover for elevator |