Product information

iMaxRC B6 50W Compact Charger
Power supply cable
Charging cable

The B6 50W charges 2 to 6 Series Lipo. Everything is automatic, so there’s no complicated guesswork. You get a safe, high-quality charge every time. It’s the easiest charger you’ll ever use!

1. Connect the charger to its power source 11-18V DC, using the DC power cord provided. When connected to power, the charger will make a single audible tone and the LiPo Status LED will illuminate green.
2. Plug the power leads of the LiPo battery and plug its balance connector into the matching balance port on the charger, too.

1.Only use the charger with LiPo battery types. Do not attempt to charge any other battery type.
2.Observe any cautions and warnings included with your battery.
3.Never leave the charger unsupervised during use. If any malfunction is observed, immediately terminate the process.
4.Keep the charger away from moisture, dust, dirt, heat, direct sunlight and vibration. Do not drop it.
5.Double-check all connections prior to starting the charge process.
6.The charger and the battery to be charged should be placed on a heat-resistant, non-flammable and non-conductive surface. Never place them on a car seat, carpet or similar. Keep flammable and volatile materials well away from the operating area.