Product information
|
|
|
Product photo
|
 | |
|
The EP glider Q12 is the new version of our very successful Q10 and its successors.
The Q12 takes use from our long-years experience with DLG models. The gliders, made with the foam/skin technology, flew much better, than those stick and film types. The main reason was seemingly the overall improvement of aerodynamic properties.
The foam/skin design provides much higher rigidity. The A/R can be very high. The ailerons and brakes will not warp. The A/R is about same as that of free flight power models.
Each half of the wing is made as single part. The dihedral is built in during the molding process.
Except for the wing, all other parts are similar to the Q11.
The pod was designed to be used for many different types of models and equipment. It is long such, that folding prop up to 14" diameter could be used. The pod is very slick, yet it provides enough room for RC and power unit parts. The bottom is a bit flattened to get even more room inside the pod.
The rear fuselage part consists of carbon/glass boom. It provides rather long tail arm for better flight stability.
The tail feathers are made in similar method as the wings. They are very lightweight.
The CG is in correct position even with the very lightweight power unit components.
The on-board RC system is normally supplied from the ESC's BEC. If the current demands of your system is higher, you can use VR-3 voltage controller. It is supplied from the battery ballance connector. We have never had any problems with this power supply type.
| Specifications |
| Wingspan |
2000 mm |
| Length |
1210 mm |
| Empty weight |
from 310 grams |
| RTF weight, w. recommended equipment |
from 530 grams |
| Wing airfoils |
AG 40, 41, 42, 43 |
Instructions manual (PDF)
Drawing (GIF)
Recommended equipment for the European class of small outrunners F5J-400:
- Motor Dualsky XM2826EA-10
- Prop Aeronaut 10x6
- Prop spinner 32/3,2 pin 8/3
- Akku Dualsky XPower 1200-2S (EX, G5)
- ESC Castle Talon 25 - 35 Amps or ESC Dualsky 30A
- controller VR-3 (optional)
- Servos:
GWS PICO BB
Dymond 47 or Dymond 60
Atlas 09 SCD or 09 AMD
or combinations
- Rx: min. 7 channels
- 4-pin connectors Deans black and red for easy connection of the wing servos
- Upgrade since 1.6.2015: firewall is fitted in fuselage, threads for mounting bolts wing-fuselage are ready.
The rate of climb with the above mentioned power unit is ca. 11 meters per second.
|
|
cart
download
