cart
download
|
| ||||||||||||||||||||||||||
The maquette of the well known glider in scale 1: 4th.
The model has an operated ailerons (using 2 servos), flaps (4 servos), air brakes (2 servos) elevator (1 servo), rudder (1 servo).
This model is completly made in the Czech Republic. The spare parts are in stock.
Stadard verzion:
- Case for the wing joiner is glued inside the fuselage. The rudder is attached to the fuselage with a control horn and bowden. The servocabel is also glued to the elevator.
- The wing has mounted the airbrakes.
Technical specification:
|
|
|
|
|
|
|
|
RECOMMENDED SERVOS FOR |
4,8V |
7,4V |
| AILERONS 2X | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
| FLAPS 4X | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
| ELEVATOR 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
| RUDDER 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
| AIRBRAKES 2x | HS-82 MG (Hitec) | HS-5087 MH (Hitec) |
| TOW HOOK 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D625MW (Hitec) |
| RETRACT GEAR 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D625MW (Hitec) |
Suitable setup for take off from the take-off dolly:
|
 |
The kit contens:
- fiberglass, white colored fuselage
- The wing : the center of the wing is made of polystyrene, coated with a veneer, reinforced with glass fiber and carbon flange. The construction is supplemented by beams which are connecting the top and bottom of the cover. The enclosure for mounting winglets and the brake shields are also installed.
- white through-colored fiberglass elevator
- white through-colored fiberglass rudder
- white through-colored fiberglass wing tip
- iron wing joiner
- fiberglass frame of the cabin
- transparent cabin
- building instructions
- small accessiries
Equipments required
 | 02043-POTEXT Name: Transport bags for Ventus 2cx Price: 319,00€  Delivery status: in stock The bags are made of very durable multi-layer materials. Set includes: bag for wing, fuselage, elevator and wing joiner. |
 | JSP-75-O Name: SPIN 75 PRO OPTO Price: 156,30€ Delivery status: in stock Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC). |
 | 5MA201110 Name: ORACOVER 10m White (10) Price: 137,08€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 10m. |
 | 5050EA-12 Name: Xmotor XM5050EA-12 V3 Price: 110,50€ Delivery status: in stock Outrunner brushless electric motor. Ø49.5mm x 48.2mm, RPM 610/1V, weight 290g, Max. 70A (15S), input voltage Lixx 5-6s, shaft 6 mm. |
 | 020116390 Name: Sailplane retract gear ø 90mm Price: 98,00€ Delivery status: in stock For model on a scale 1:4 and to weight 6 kg. |
 | 020D01 Name: Sailplane Take-off Dolly I Price: 82,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 219 mm. |
 | 0200192 Name: GM Scale spinner 44,5/6 white Price: 69,00€ Delivery status: in stock Precision carbon spinner for folding prop Ø44,5 mm, collet 6,0 mm, for blade root width 8 mm. Weight: 20g. |
 | 02057SP Name: Polystyrene 1:4 sailplane pilot Jan Price: 63,00€ Delivery status: in stock Quarter scale sailplane pilot doll. Hand painted. Designed for Discus 2a, Discus 2c, Ventus 2cx. Weight: 39g. |
 | 020SERVISEG Name: Construction Service ((installation of EG tow hook in Discus, Ventus, Swift and Fox fuselages) Price: 49,90€ Delivery status: in stock The price includes the towing hook (item no. 020201EG) and gluing to the fuselage, see picture. Also included is a tow hook servo tray (item no. 20201EG.ST). We recommend this service if the model is equipped with a motor, but you would like to keep the possibility of getting the model into the air by towing. Notice: for the combination of motor and tow hook |
 | 02043PDDEL Name: Panel instrument Ventus 2cx Deluxe Price: 46,00€ Delivery status: in stock fiberglass gelcoated |
 | 02043s Name: Seat Ventus 2cx Price: 46,00€ Delivery status: in stock fiberglass gelcoated |
 | 020GM14.8W Name: GM 14 X 8 F (White) Price: 44,00€ Delivery status: in stock Carbon folding prop 14x8", blade root width 8 mm, the pin dia. 3mm. |
 | 1HI38801 Name: D625MW rychlé a silné digi servo (10kg) Price: 43,71€ (recommended quantity: 2 pieces) Delivery status: in stock Rychlé digi servo s kovovými převody nové generace s elektronikou s bleskurychlou odezvou pro všeobecné použití. Programovatelné, napájení 4,8-7,4V. Tah 6,3kg.cm, rychlost 0,20s/60°při 4,8V, tah 10kg.cm, rychlost 0,13s/60° při 7,4V. Náhrada HS-5625MG a HS-5665MH. Notice: 7,4V for: 1x tow hook, 1x retract gear |
 | 1HI3181 Name: HS-5087 MH HiVolt DIGITAL Price: 41,63€ (recommended quantity: 10 pieces) Delivery status: in stock Silné digitální mikroservo 22g s kovovými převody a zvýšeným napájecím napětím (až 2S LiPo) pro elektrolety a větroně. 1xBB, tah 4,3 kg/cm, rychlost 0,13s/60st při 7,4V. Programovatelné. Notice: 7,4V for: 2x aileron, 4x flap, 2x airbrake, 1x elevator, 1x rudder |
 | 020SERVISVENTUS Name: Construction Service (Cutting the nose of the Ventus fuselage for 44,5mm GM spinner including gluing the motor mount) Price: 37,80€ Delivery status: in stock The used motor mount is intended for the recommended Dualsky 5050 motor. If you are interested in gluing the motor mount for another motor, please contact us. |
 | 1HI3115-1x Name: HS-645 MG bulk 1pc unpacked Price: 34,00€ (recommended quantity: 2 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 1x tow hook, 1x retract gear |
 | 5MA200110 Name: ORACOVER 2m white (10) Price: 29,13€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 2m. |
 | 02043-CB Name: Cabling for Ventus 2cx wings TOPMODEL CZ Price: 28,60€ Delivery status: in stock |
 | 1HI3050-1x Name: HS-85 MG Bulk 1pc Price: 28,40€ (recommended quantity: 8 pieces) Delivery status: in stock Strong microservo 21g with metal gears for electric planes and sailplanes. 1xBB, torque 3,0 kg/cm, speed 0,16s/60st in 4,8 V. Notice: 4,8V for: 2x aileron, 4x flap, 1x elevator, 1x rudder |
 | 02043PD Name: Panel instrument Ventus 2cx Price: 26,00€ Delivery status: in stock fiberglass gelcoated. Dashboards are delivered in Half state for easy installation onboard instruments. |
 | 1HI3042-1x Name: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: 4,8V for: 2x airbrakes |
 | 02043-7 Name: Ventus 2cx - 4,5m stickers Price: 16,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Ventus 2cx - 4,5m wingspan. |
 | 02043-7.2cxM Name: Ventus 2cx M D-KBTL 4,5m stickers Price: 16,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Ventus 2cx M D-KBTL - 4,5m wingspan. |
 | 020201EG Name: Tow hook EG Price: 13,90€ Delivery status: in stock For FES (Front Electric Sustainer) model version . Dimensions: 50x20x8mm, pushrod Ø3mm. Notice: for the combination of motor and tow hook |
 | 02043-ON Name: Protective sleeve for Ventus 2cx canopy Price: 12,00€ Delivery status: in stock Protective sleeve to prevent scratching during storing and transporting the model. |
 | 02043-DOOR Name: Doors for sailplane retract gear Ventus 2cx Price: 9,90€ Delivery status: in stock Spare doors for sailplane retract gear. |
 | 1HI7165 Name: Servo lock HS-80/81/82/85/5087 Price: 9,13€ (recommended quantity: 3 pieces) Delivery status: in stock "Dish" with cap and aerodynamic cover rod. 1 pair. Notice: for ailerons & flaps servos |
 | 02057-cabinlatch Name: Cabin latch Discus 2c, Discus 2a, Ventus 2cx Price: 8,10€ Delivery status: in stock |
 | 05013 Name: Remote tow hook for up to wingspan 4,5 m Price: 6,80€ Delivery status: in stock Made in aluminium. To be glued inside the nose of the gliders (like the real one). A hook connected to the servo rotates in a slot, and in doing so, "capture" the towing cable.for gliders up to wingspan 4,5 m, Ø10mm, length 48mm |
 | 02043-DOOR-PLATE Name: Plate for the production of Ventus 2cx retract gear door Price: 5,90€ Delivery status: in stock Material: white gelcoated fiberglass. Dimensions: approx. 80x125mm |
 | 0492004 Name: Sliding canopy window 1:4 Price: 5,60€ Delivery status: in stock Sliding window, scale 1:4. |
 | 020201EG.ST Name: Servo tray for EG tow hook Price: 4,25€ Delivery status: in stock For standard servo. Suitable for EG tow hook for Discus 2a, Discus 2c, Ventus 2cx, Swift S1 3.73m, Swift 3.14m. Notice: for tow hook EG |
 | 0492114 Name: ASSEMBLY JIG for SLIDING WINDOW 1:4 Price: 3,90€ Delivery status: in stock Wise Jig to install more easily the sliding windows on the canopies of your gliders 1:4 scale |
 | 020CH50ML Name: Pattex Chemoprén Extrém 50ml Price: 3,12€ Delivery status: in stock For contact bonding with very high strength. Especially for bonding leather, wood, rubber, textiles, metal, plywood, cardboard and various materials from hard plastics. Notice: for gluing cabin to the frame |
 | 05056307 Name: Plastic servo covers HS 81/82 Price: 3,00€ Delivery status: in stock For micro servo, Ø 58 mm Notice: complement part of servo mount for outer ailerons |
 | 02020-DSP Name: Spring for closing the retract gear door (Discus 2a, Discus 2c, Ventus 2cx) 2pcs Price: 2,24€ Delivery status: in stock Tension spring terminated by eyelets. Material: wire Ø0,5mm. Dimensions Ø5x47mm. Package content: 2pcs. |
 | N3037 Name: Wheel Ø37 Price: 2,00€ Delivery status: in stock Ø37 x 15mm hole Ø3 mm Price per piece. Notice: tail wheel |
 | 182040 CAN15 Name: Connector CAN 15 Price: 1,80€ (recommended quantity: 2 pieces) Delivery status: in stock Three-Row connector, 15 PIN. Connector suitable for wiring of servos in the wing and fuselage. By using this connector is not necessary for each assembly / disassembly wing separate cables to connect the servos to the receiver. Price for 1 pair. |
 | 0167823-0,25 Name: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery, receiver, etc. |
 | 0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. |
 | 0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 02020-1-24 Name: Tow hook servo tray (Discus 2a, Discus 2c, Ventus 2cx) Price: 1,30€ Delivery status: in stock |
 | 020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
 | 8GR3009 Name: Servo Cable Twisted Thick JR 0.25mm2 Price: 1,04€ Delivery status: in stock Twisted Servocable (three-row) 0,25mm². Price per common meter. 1 m Weight 13 grams. Notice: 7,5m |
 | 9001 Name: Thermo-Shrinkable insulation Ø1,6mm (1m) Price: 0,85€ Delivery status: in stock For isolation of soldered joints of thin cables Ø1,6mm Price per 1 m. Notice: 0,75m |
Spare parts
 | 02043-1DL Name: Fuselage Ventus 2cx Deluxe Price: 577,00€ Delivery status: in stock Completely fitted fuselage (equipped with canopy+frame, towing hook, retractable landing gear, connectors with cables, seat, dashboard, rudder). Covered with stickers. White fiberglass. Length 1610 mm. |
 | 02043-2DL Name: Ventus 2cx 4,5 m ARF DELUXE Wings Price: 525,40€ Delivery status: in stock Wingsnap 4,5m.. Wings with metallic airbrakes installed. Wing fixing device already installed and servos connector also. Wingspan Oracover®.Stickers are sticked on wings. |
 | 02043-2ARFSTANDARD Name: Ventus 2cx 4,5 m ARF STANDARD Wings Price: 486,50€ Delivery status: in stock Wings with metallic airbrakes installed. Covered Oracover® . |
 | 02043-2ARCSTANDARD Name: Ventus 2cx 4,5m STANDARD Wings (uncovered - ready to cover) Price: 417,00€ Delivery status: in stock Wings with metallic airbrakes installed.not covered. |
 | 02043-1 Name: Fuselage Ventus 2cx Price: 205,00€ Delivery status: in stock fiberglass white gelcoated, délka 1535 mm |
 | 02043-6DL Name: Canopy Ventus 2cx De luxe 4,5 m Price: 128,00€ Delivery status: in stock Set including closing window. Material: Vivak® 1mm, transparent. |
 | 02043-3 Name: Ventus 2cx elevator Price: 69,00€ Delivery status: in stock fibreglass laminate elevator. Length 623mm. Weight 98g. The package includes 1x elevator and 1 x 2290 BR. |
 | 0203016 Name: Airbrakes 300mm (1 pair) Price: 53,00€ Delivery status: in stock Aerodynamic brakes for model up to 4,5 m wingspan. 1 pair |
 | 02043-6-14 Name: Canopy Ventus 2cx with window 1:4 Price: 42,00€ Delivery status: in stock Canopy with installed 1:4 scale window. Material: Vivak® 1mm, transparent. |
 | 02043-4 Name: Ventus rudder 2cx Price: 32,00€ Delivery status: in stock White engrained laminate, spare part. The package includes 1x rudder and 1x 2290 BR. |
 | 02043-6 Name: Canopy Ventus 2cx Price: 29,50€ Delivery status: in stock Material: Vivak® 1mm, transparent. |
 | 02043-5 Name: Canopy frame Ventus 2cx Price: 29,00€ Delivery status: in stock fiberglass |
 | 02043-23 Name: Wing tip Ventus 2cx Price: 28,00€ Delivery status: in stock 1 pair, 72 mm width at the root, airfoil HQ 3/12 |
 | 02043-6II Name: Canopy Ventus 2cx II.QUALITY Recommended price: 29,50 (-40% discount) Price: 17,70€ Delivery status: in stock Material: Vivak® 1mm, transparent. II.QUALITY |
 | 02043-24 Name: Ventus 2cx Wing joiner Price: 14,90€ Delivery status: in stock Material : steel; Length : 440mm; diameter : 12mm; weight : 393g. |
 | 020910W Name: 2K White paint 100ml + hardener TOPMODEL CZ Price: 13,30€ Delivery status: in stock 2K acrylic white paint used for laminating TOPMODEL CZ parts. |
 | 0203016.2 Name: Cover plates for 300mm airbrakes (2pcs) Price: 6,50€ Delivery status: in stock Fiberglass cover plates for 300mm airbrakes. Unpainted. Set contains 2 pcs. Dimensions: 9,5 x 309 x 1 mm |
 | TAPE12 Name: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. |
 | 02020-6-5 Name: Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (front + rear) Price: 4,50€ Delivery status: in stock fiberglass |
 | 03800 Name: Clip fixing 2 pairs Price: 3,50€ Delivery status: in stock for wing fixing, plastic, 2 pairs. 2 pair ( 2 pcs into fuselage + 2 pcs into wing + 1x disconnect wedge for wings) |
 | 190124827 Name: Cabin latch Price: 2,70€ Delivery status: in stock from steel + plastic Notice: canopy fixing standard |
 | 05028 Name: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. Notice: airbrake servo mount |
 | 0200GFLAG Name: Germany flag 2pcs Price: 1,85€ Delivery status: in stock dimensions: 51x36mm, color: black / red / gold |
 | 02043-7INSCV2CX Name: Lettering sticker under canopy for Ventus 2cx (2Pcs) Price: 1,60€ Delivery status: in stock |
 | 02020-4-1 Name: Hinge for fixing the Discus 2a (Discus 2c, Ventus 2cx) rudder Price: 1,50€ Delivery status: in stock material: PVC |
 | 2290 BR Name: Brass control horn M3 short 2 pcs Price: 1,44€ Delivery status: in stock Very small, aerodynamic clear, brass control horn for metal or plastic clevises (MPJ 2110, 2140). Content of package: 2 pcs Notice: for airlerons, flaps, elevator and rudder |
 | 1004 AL Name: Mounting nut M3 4pcs Price: 1,44€ Delivery status: in stock Fixing nuts, aluminum alloy, assembly gluing, M3 thread. 4pcs Notice: nut for ailerons and flaps |
 | 02020-6-3 Name: Canopx hinge shaft Discus 2c, Discus 2a, Ventus 2cx Price: 1,30€ Delivery status: in stock |
 | 519.1,5.1250 Name: Steel wire 1.5mm, 1250mm Price: 1,10€ Delivery status: in stock Spring steel wire suitable for landing gears, wing joiners, shafts, struts, tailwheel systems, etc. Notice: rudder pushrod |
 | 020CAN-01 Name: Spacer pad for CAN9 and CAN15 connector Price: 0,70€ Delivery status: in stock |
 | terc60 Name: target Ø60mm stickers Price: 0,25€ Delivery status: in stock Notice: airbake servo top |