|
|
Product description and features
The A30-14M-DF is designed specifically for the WeMotec MiniFan 70mm and Hacker Streamfan 70mm impellers. The 6-pole motor is designed with a special mount for impellers, and of course fits other 64-70mm impellers as long as the maximum current does not exceed 60Amps. The shaft is guided by three high precision ball bearings to achieve very accurate concentricity.
.
This weight-optimized high-end motor with a weight of only 110g fits perfectly in impeller models up to 1.3 kg.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the Accessories tab.
Scope of delivery
1x A30-14 M-DF kv3500 and instruction.
Drive recommendation
Technical data:
Motor: A30-14M-DF
Impeller: 9-blade glass fiber reinforced
Cells: 4
A30-14 M-DF kv3500 | ||||||
---|---|---|---|---|---|---|
Item no.: 15716111 | ||||||
LiPo | 4S | 3S | ||||
Voltage [V] | 14,8 | 11,1 | ||||
Current [A] | 58 | 36 | ||||
Power [W] | 858 | 400 | ||||
Thrust in gram | 1300 | 960 | ||||
Controller [A] | 70-80 | 40-50 | ||||
Timing [°] | 15 | 15 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 500 |
Poles | 6 |
Turns | 14 |
Idle current (I0) at 8.4V [A] | 3,1 |
Internal resistance (Ri) [Ohm] | 0,019 |
Recommended timing [°] | 10 |
Switching Frequenzy [kHz] | 8 |
Idle speed per volt (kv) | 3500 |
Dimensions and weight | |
Weight [g] | 110 |
Length [mm]/[in] | 62 |
Outer diameter [mm]/[in] | 35 |
Shaft diameter [mm]/[in] | 3,17 |
Delivery contents | |
Prop Adapter | Nein |
Mounting cross | Ja |
Gold plug mm (soldered) | 3,5 |