cart
download
|
| ||||||||||||||||||||||||||||
Product description and features
This A40 gear drive is equipped with the 8-pole version of the A40-L motor, which has been tried and tested thousands of times. The high-torque, high-revving external rotor, in combination with the efficient 6.7:1 planetary gearbox, has been specially developed for larger electric gliders up to approx. 10 kg take-off weight. Thanks to the perfect coordination of motor and gearbox, this powerhouse can efficiently and powerfully drive propellers up to 23 inches. It is a very robust and reliable system that works reliably even under extreme conditions and high loads.
This weight-optimised high-end drive A40-8L V2 kv1300 + 6,7:1 PG with a weight of only 315g fits perfectly in gliders up to 10 kg.
Accessories
You will find the appropriate regulator, batteries and a suitable propeller in the accessories tab.
Scope of delivery
1x A40-8L V2 kv1300 + 6,7:1 PG and manual.
Drive recommendation
| A40-8L V2 kv1300 + 6,7:1 PG | ||||||
|---|---|---|---|---|---|---|
| Item no: 33826726 | ||||||
| Propeller | RFM 20x13 | Falcon 21x13x13 | ||||
| LiPo | 8S | 8S | ||||
| Voltage [V] | 29,6 | 29,6 | ||||
| Current [A] | 47 | 43 | ||||
| Power [W] | 1391 | 1273 | ||||
| RPM | 5160 | 5200 | ||||
| Controller [A] | 50-70 | 50-70 | ||||
| Timing [°] | 15-20 | 15-20 | ||||
| Specifiactions | |
| max. power range [W] (max.15 sec.) | 1970 |
| Poles | 8 |
| Turns | 8 |
| Idle current (I0) at 8.4V [A] | 2,5 |
| Internal resistance (Ri) [Ohm] | 0,014 |
| Gear reducing | 6,7:1 |
| Recommended timing [°] | 15 - 20 |
| Switching Frequenzy [kHz] | 8 |
| Controller recommendation [A] (depending on setup) | 55 - 70 |
| Leerlaufdrehzahl pro Volt (kv) ohne Getriebe | 1300 |
| Dimensions and weight | |
| Weight [g] | 315 |
| Length [mm]/[in] | 76 |
| Outer diameter [mm]/[in] | 41,7 |
| Shaft diameter [mm]/[in] | 6 |
| Delivery contents | |
| Prop Adapter | Nein |
| Mounting cross | Nein |
| Gold plug mm (soldered) | Nein |
| Gold plug mm (recommended) | 4 |
| Backmount mountable | Nein |
| Front mountable | Ja |
