cart
download
|
| ||||||||||||||||||||||||||
This "little strongman" almost all extreme maneuvers with "calmly". Talon 15 is intended for use in haloletech, parkflyetech, micro and sub-micro helicopters.
The BEC is switched. Provides continuous and 3A peak current of 8A. It can handle almost all the power "hungry" servo.
Perfect for smaller models of EPP and small helicopters.
Talon 15 also includes all facilities for helicopters, in which the company is the world leader in Castle. Compact and slim design allows for easy installation into each model and each use.
As is customary Castle of products is available for free professional software for operating the control and programming by Castle Link.
Specifications controller TALON 15
Application: Indoor model, parkflyer, micro helicopters, aircraft with consumption of up to 15A
Power supply: MIN: 2S, MAX: 4S LiPo
Max. current continuously at full throttle: 15A *
The output voltage of BEC: 5.5V
The output current of BEC: 3A continuous, 8A peak **
Dimensions: Width: 14.7 mm
Length: 27.9 mm
Height: 8.1 mm
Weight (without cable): 3.4 g
Weight (with cables): 7.2 g
Connectors ESC-motor and ESC accu-not included.
* USE RC MODEL: 15A at current and power from one set of 1500 mAh and cooling reg. Stream of air at a speed of 8 km / h at an air temperature of 25 ° C. The temperature controller must not exceed 100 ° C. The crossing may result in damage or destroy the controller. Always try load at full throttle. To reduce the temperature controller reduce the load (small propeller) or have better air cooling.
** For 0.5, which meets the current needs of most servos present. Each servo has a different collection and each model is different, so always before the flight, make sure that the current from the BEC will suffice.
Application: Indoor model, parkflyer, micro helicopters, aircraft with consumption of up to 15A
Power supply: MIN: 2S, MAX: 4S LiPo
Max. current continuously at full throttle: 15A *
The output voltage of BEC: 5.5V
The output current of BEC: 3A continuous, 8A peak **
Dimensions: Width: 14.7 mm
Length: 27.9 mm
Height: 8.1 mm
Weight (without cable): 3.4 g
Weight (with cables): 7.2 g
Connectors ESC-motor and ESC accu-not included.
* USE RC MODEL: 15A at current and power from one set of 1500 mAh and cooling reg. Stream of air at a speed of 8 km / h at an air temperature of 25 ° C. The temperature controller must not exceed 100 ° C. The crossing may result in damage or destroy the controller. Always try load at full throttle. To reduce the temperature controller reduce the load (small propeller) or have better air cooling.
** For 0.5, which meets the current needs of most servos present. Each servo has a different collection and each model is different, so always before the flight, make sure that the current from the BEC will suffice.