|
|
|
Product photo
|
 | |
When programming controllers Castle (via PC or programming card) must be a direct connection between the regulator and jumper Castle Link.
This often means hard-disconnect connector from the controller and the receiver after programming it back to the receiver involved. With this jumper QuickConnect complete waste. QuickConnect adapter automatically detects the presence of Castle Link and switched it to a signal from the receiver.
Connection: Connect the controller with a jumper OuickConnect - three pins labeled ESC, observing the color coding. The combination of Insure accompanying shrink tubing. The connector labeled "Connect the receiver to" plug the receiver into the connector labeled "Connect to Castle Link as needed" to install the model to the available space.
Note: Programming Card Flying Castle and Castle Driving can be used with a jumper OuickConnect only when programming via PC, the card works as an adapter CastleLink. When you connect the card to the controller via a jumper QuickConnect can not be programmed.
Weight: 7 g (including cable)
cart
download
