Product information

Product information
Producer:Kavan
Name:KAVAN - Li-Po 2200mAh/22,2V 60/120C, 48,8Wh
 
Category:ACCUMULATORS > Sets > Li-pols > Air > 2000-3500mAh >
 
Price:70,42€ pc  
 
Item No:KAV33.6064
EAN:8596450023642
Delivery status:in stock at supplier
Product information:60/120C Ultra high performance LiPo battery pack for the most demanding applications, charge rate 2C. Six-cell 6s1p 22.2V 2200mAh. Dimensions: 105x33x42mm, weight: 329g, JST-XH balance connector.
Product photo

KAVAN high-end six-cell lithium-polymer 60/120C battery packs pump fresh energy into the veins of your giant models! Thanks to the advanced technology applied in their manufacture, they guarantee extremely high load capacity when discharging, enable fast charging with long service life and favourable purchase price.

KAVAN batteries have a standard discharge current of 60C, peak current up to 120C, and a fast-charging opinion (1–2C). They are specially designed for high-performance aerobatic specials and scale models powered by brushless electric motors and RC helicopters for 3D and classic flying. The high current load capacity ensures maximum motor power utilization and allows for an aggressive flying style while maintaining a very long service life.

Don't charge the KAVAN batteries with currents higher than 2C, for normal operation, we recommend currents between 1–2C. We recommend using a balancer with every charge. KAVAN batteries don't require initial formation, but if you intend to charge the pack by a current greater than 1C, we recommend not exceeding 1C for the first three charge cycles. There is no need to fully discharge the battery before charging - e.g. you can safely charge batteries that are only 50% discharged.)

The battery is supplied as an "Air Pack" designed primarily for powering models of aeroplanes and helicopters. It is equipped with silicone power (charging) cables with a diameter dimensioned for the expected current loads (without connectors). The service connector is a type of the standard JST-XH system - they have the advantage of small size and weight (which will be especially appreciated by users of packs with a low capacity), they have simple pin connections and can even be plugged directly into the balancer sockets on RAYTRONIC, SkyRC and other chargers without the use of an adapter.

The package includes: KAVAN 60/120C battery, user manual.

Capacity [mAh] 2200
Voltage [V] 22.2
Charging current [A] 2.2 - 4.4
Max. charging current [A] 4.4
Discharging current [A] 132
Max. discharging current [A] 264
Energy [Wh] 48.8
Length [mm] 105
Width [mm] 33
Height [mm] 42
Weight [g] 329

Equipments required

KAVAN C100 Duo balanced charger 2x 500WKAV34.1100
Name: KAVAN C100 Duo balanced charger 2x 500W
Price: 149,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Dual channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV, 2-24V Pb with current 0,2-20A (max. 2x100W with mains power or 2x 500W with DC power). Discharging 0,2-1,5 A (max. 2x 15W). Power supply 10-30V DC/230V AC. Internal resistance measurement.
iSDT BAP6 smart Lipol modul pro 5-6SISDT1020
Name: iSDT BAP6 smart Lipol modul pro 5-6S
Price: 4,96€ vložit zboží do košíku
Delivery status: in stock at supplier
Smart modul pro 5-6S LiFe,LiPo,LiHv,ULiHv. Připojení přes balanční konektor akumulátoru. Miniaturní rozměry 36x24x9mm, hmotnost pouze 4,7g. Ovládané pomocí BT přes aplikaci BattAir.

Equipments required for models

M4 (pnp) stavebnice s motorem, servy a ESC - magentaOSHM405P
Name: M4 (pnp) stavebnice s motorem, servy a ESC - magenta
Price: 649,58€ vložit zboží do košíku
Delivery status: contact us
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze PNP obsahuje: nesestavený model, střídavý motor, 4x servo, regulátor, listy nosného a vyrovnávacího rotoru.
M4 (pnp) stavebnice s motorem, servy a ESC - modráOSHM406P
Name: M4 (pnp) stavebnice s motorem, servy a ESC - modrá
Price: 649,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze PNP obsahuje: nesestavený model, střídavý motor, 4x servo, regulátor, listy nosného a vyrovnávacího rotoru.
M4 (pnp) stavebnice s motorem, servy a ESC - oranžováOSHM408P
Name: M4 (pnp) stavebnice s motorem, servy a ESC - oranžová
Price: 649,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze PNP obsahuje: nesestavený model, střídavý motor, 4x servo, regulátor, listy nosného a vyrovnávacího rotoru.
M4 (pnp) stavebnice s motorem, servy a ESC - žlutáOSHM407P
Name: M4 (pnp) stavebnice s motorem, servy a ESC - žlutá
Price: 649,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze PNP obsahuje: nesestavený model, střídavý motor, 4x servo, regulátor, listy nosného a vyrovnávacího rotoru.
M4 (kit) stavebnice s motorem - modráOSHM402K
Name: M4 (kit) stavebnice s motorem - modrá
Price: 449,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze KIT obsahuje: nesestavený model, střídavý motor, listy nosného a vyrovnávacího rotoru.
M4 (kit) stavebnice s motorem - oranžováOSHM404K
Name: M4 (kit) stavebnice s motorem - oranžová
Price: 449,58€ vložit zboží do košíku
Delivery status: contact us
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze KIT obsahuje: nesestavený model, střídavý motor, listy nosného a vyrovnávacího rotoru.
M4 (kit) stavebnice s motorem - žlutáOSHM403K
Name: M4 (kit) stavebnice s motorem - žlutá
Price: 449,58€ vložit zboží do košíku
Delivery status: in stock at supplier
Stavebnice 3D vrtulníku třídy "380" s CCPM deskou cykliky 120° s nosným rotorem o průměru 875 mm poháněný střídavým motorem. Verze KIT obsahuje: nesestavený model, střídavý motor, listy nosného a vyrovnávacího rotoru.