Product information

Product information
Producer:Kavan
Name:KAVAN Brushless Motor PRO 3536-1150
 
Category:ELECTRIC MOTORS > Brushless > Air > Kavan > Engines > Kavan PRO >
 
Price:45,42€ pc  
 
Item No:KAV30.2019
EAN:8596450022577
Delivery status:in stock at supplier
Product information:Outrunner brushless electric motor for model aeroplanes: glider 1600g, trainer 1500g, acro 1300g, 3D 1050g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2814-1150.
Product photo
more photos...

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.

Motor Designation System: PRO xxYY-zzzz
PRO - brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolution per minute per Volt (RPM/V), “KV“

 

KAVAN PRO 3536-1150

KAVAN PRO 3536-1150 is a motor for model aeroplanes up to 1700 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for 2000 mm electric powered gliders, 1200-1400 mm high wing trainers, scale and aerobatic models.

Motor installation: KAVAN 3536-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0 mm plywood. The radial mount set is supplied with the motor.

The motor set contents: KAVAN PRO 3536-1150 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual

Note: Alternative designation based on the stator dimensions: 2814-1150.

Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 1150
Max. power (180 s) [W] 800
Internal resistance [mOhm] 26
Open-circuit current (při 10 V) [A] 1.8
Max. peak current (180 s) [A] 55
Diameter [mm] 35.2
Length [mm] 34
Length celková [mm] 54.5
Shaft diameter [mm] 5
Weight [g] 108
Poles count 14
Timing [°] 20 - 25
ESC [A] 60 - 70
Weight of glider (up-to) [g] 1600
Weight of trainer (up-to) [g] 1500
Weight of acrobat (up-to) [g] 1300
Weight of 3D (up-to) [g] 1050

Equipments required

KAVAN PRO-60SB brushless ESC 60AKAV32.31025
Name: KAVAN PRO-60SB brushless ESC 60A
Price: 62,08€ vložit zboží do košíku
Delivery status: in stock at supplier
Programmable brushless ESC for aircraft models. Continuous current 60A (peak 80A), 3–6 LiPo cells power, switch-mode BEC 5.2V, 6V, 7.4V/8A. Weight: 73g; dimensions: 69x35x18mm.
KAVAN R-60SB SBEC 60AKAV32.42013
Name: KAVAN R-60SB SBEC 60A
Price: 35,38€ vložit zboží do košíku
Delivery status: in stock
Programmable brushless ESC for model aircraft. Continuous current 60A (peak 80A), power supply 3-6 LiPo cells, switched BEC 5V/7A, weight 63g, dimensions 77x35x14mm.

Spare parts

KAVAN zadní montáž PRO 3530-4355KAV30.2016.1
Name: KAVAN zadní montáž PRO 3530-4355
Price: 7,04€ vložit zboží do košíku
Delivery status: in stock at supplier
KAVAN hřídel PRO 3536KAV30.2018.2
Name: KAVAN hřídel PRO 3536
Price: 3,71€ vložit zboží do košíku
Delivery status: in stock at supplier

Equipments required for models

KAVAN Vibe - blueKAV02.8028
Name: KAVAN Vibe - blue
Price: 157,92€ vložit zboží do košíku
Delivery status: in stock at supplier
A builder’s kit of 3D aerobatic biplane park-flyer (1000 mm wingspan) made of virtually unbreakable thoroughly carbon-reinforced EPP foam for 350–500W brushless motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife-edge handling. Aileron, elevator and rudder control.
KAVAN Vibe - greenKAV02.8029
Name: KAVAN Vibe - green
Price: 157,92€ vložit zboží do košíku
Delivery status: in stock at supplier
A builder’s kit of 3D aerobatic biplane park-flyer (1000 mm wingspan) made of virtually unbreakable thoroughly carbon-reinforced EPP foam for 350–500W brushless motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife-edge handling. Aileron, elevator and rudder control.
KAVAN Vibe - orangeKAV02.8030
Name: KAVAN Vibe - orange
Price: 157,92€ vložit zboží do košíku
Delivery status: in stock at supplier
A builder’s kit of 3D aerobatic biplane park-flyer (1000 mm wingspan) made of virtually unbreakable thoroughly carbon-reinforced EPP foam for 350–500W brushless motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife-edge handling. Aileron, elevator and rudder control.
KAVAN Savage MAX - blueKAV02.8025
Name: KAVAN Savage MAX - blue
Price: 132,92€ vložit zboží do košíku
Delivery status: in stock at supplier
A builder’s kit of 3D aerobatic park-flyer (1080 mm wingspan) made of virtually unbreakable thoroughly carbon reinforced EPP foam for 350-500W brushles motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife edge handling. Aileron, elevator and rudder control.
KAVAN Savage MAX - redKAV02.8026
Name: KAVAN Savage MAX - red
Price: 132,92€ vložit zboží do košíku
Delivery status: in stock at supplier
A builder’s kit of 3D aerobatic park-flyer (1080 mm wingspan) made of virtually unbreakable thoroughly carbon reinforced EPP foam for 350-500W brushles motors. Symmetrical wing section, flat, large area fuselage for great 3D/knife edge handling. Aileron, elevator and rudder control.