Product information

Product information
Producer:Kavan
Name:KAVAN Brushless Motor PRO 3536-850
 
Category:ELECTRIC MOTORS > Brushless > Air > Kavan > Engines > Kavan PRO >
 
Price:45,42€ pc  
 
Item No:KAV30.2020
EAN:8596450022584
Delivery status:in stock at supplier
Product information:Outrunner brushless electric motor for model aeroplanes: glider 1800g, trainer 1700g, acro 1300g, 3D 1050g, KV8500 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2814-850.
Product photo
more photos...

KAVAN PRO series motors are high performance 14-pole brushless outrunners. State-of-the-art design, hardened steel shafts, high quality ball bearings, High grade material used for stators and rotors ensure long lifetime and unbeatable performance and high efficiency. KAVAN PRO series motors are low revolution/high torque electric motors capable of swinging large diameter propellers without need for a gearbox.

Motor Designation System: PRO xxYY-zzzz
PRO - brushless outrunner electric motor
xx - motor diameter in mm
YY - motor length in mm
zzzz - revolution per minute per Volt (RPM/V), “KV“

 

KAVAN PRO 3536-850

KAVAN PRO 3536-850 is a motor for model aeroplanes up to 1800 g all-up weight powered by 3-4S LiPo flight battery pack. It is great for 2000-2500 mm electric powered thermal gliders, MULTIPLEX® FunCub, Solius, Heron, 3D aerobatic models - it is more suitable for slower models that work better with a larger propeller with lower rpm.

Motor installation: KAVAN 3536-1150 has been designed both for the front and radial mount installation. Front mount: Use four M3 screws; these may not go deeper than 3-4 mm into the front case. Radial mount: Use four M3 screws to secure the mounting cross to the firewall. The firewall should be made of 4.0 mm plywood. The radial mount set is supplied with the motor.

The motor set contents: KAVAN PRO 3536-850 motor w. cables (3.5 mm gold-plated connectors), radial mount set accessories. The full instruction manual can be downloaded here: KAVAN PRO Brushless Motors Instruction Manual

Note: Alternative designation based on the stator dimensions: 2814-850.

Powering LiXX cells 3 - 4
RPM/V [ot./min/V] 850
Max. power (180 s) [W] 650
Internal resistance [mOhm] 43
Open-circuit current (při 10 V) [A] 1.2
Max. peak current (180 s) [A] 45
Diameter [mm] 35.2
Length [mm] 34
Length celková [mm] 54.5
Shaft diameter [mm] 5
Weight [g] 108
Poles count 14
Timing [°] 20 - 25
ESC [A] 45 - 60
Weight of glider (up-to) [g] 1800
Weight of trainer (up-to) [g] 1700
Weight of acrobat (up-to) [g] 1300
Weight of 3D (up-to) [g] 1050

Equipments required

KAVAN PRO-60SB brushless ESC 60AKAV32.31025
Name: KAVAN PRO-60SB brushless ESC 60A
Price: 62,08€ vložit zboží do košíku
Delivery status: in stock at supplier
Programmable brushless ESC for aircraft models. Continuous current 60A (peak 80A), 3–6 LiPo cells power, switch-mode BEC 5.2V, 6V, 7.4V/8A. Weight: 73g; dimensions: 69x35x18mm.
KAVAN R-60SB SBEC 60AKAV32.42013
Name: KAVAN R-60SB SBEC 60A
Price: 35,38€ vložit zboží do košíku
Delivery status: in stock
Programmable brushless ESC for model aircraft. Continuous current 60A (peak 80A), power supply 3-6 LiPo cells, switched BEC 5V/7A, weight 63g, dimensions 77x35x14mm.

Spare parts

KAVAN zadní montáž PRO 3530-4355KAV30.2016.1
Name: KAVAN zadní montáž PRO 3530-4355
Price: 7,04€ vložit zboží do košíku
Delivery status: in stock at supplier
KAVAN hřídel PRO 3536KAV30.2018.2
Name: KAVAN hřídel PRO 3536
Price: 3,71€ vložit zboží do košíku
Delivery status: in stock at supplier