|
|
Chaservo DS09 - 9mm - 13,6g - 9 kgcm
Horizontal flanges.
The HW set contains two plastic reductions, which allow to install the servo into flat frame.
Horizontal flanges.
The HW set contains two plastic reductions, which allow to install the servo into flat frame.
The DS09 is an even lighter low/med/high voltage polymer cased servo. It is especially good for ailerons on DLGs, electric racers, and all models with thin flying surfaces.
The DS09 can be operated from a voltage as low as 3.8V (1S LiPo) or as high as 8.4V (2S LiPo). Chaservo improved its geartrain machining tolerances, and this servo is completely slop free, and equal to products costing twice as much. This servo has steel gears, and is very tough.
The Chaservo DS09 high torque, good speed, and 9mm thinness make it suitable for many high performance glider, pylon racers and EDF applications. The DS09 is appropriate for F3K, F3L, F5D, F5J, F5L and many types of high performance models.
Chaservo DS09 Specifications | |
Body dimensions | 23,5 x 9 x 27,5 |
Stall torque (4.8V) | 6,0 kg.cm |
Stall torque (6V) | 7,0 kg.cm |
Stall torque (7,4V) | 8,0 kg.cm |
Stall torque (8.4V) | 9,0 kg.cm |
Weight | 13,6 g |
Operating speed (4.8V) | 0.16 sec/60° |
Operating speed (6V) | 0.13 sec/60° |
Operating speed (7.4V) | 0.11sec/60° |
Operating speed (8.4V) | 0.10sec/60° |
Operating voltage | 3.3V to 9V |
Bearings | 2 ball bearings |
Gear material | Steel |
Case material | polymer, aluminium alloy |
Motor type | Coreless DC |
Working frequency | 1520us/333 Hz |
Soft start | Yes |
Digital | Yes |
Shaft | 25T/5 |