Product information

Product information
Producer:Mega motor
Name:Mega ACn 16/15/4
 
Category:ELECTRIC MOTORS > Brushless > Air > MEGA > Mega AC > Mega ACn 16/x/x >
 
Price:80,00€ pc  
 
Item No:20161504
Delivery status:1 week
Product information:Brushless electric motor Ø28mm x 36,4mm, KV2110 rpm on V, weight 76g, max. current 25A, power supply Lixx 2-4 cells, shaft Ø3,2mm.
Product photo

Description

  • Hardened stell shaft, diameter 3,2 mm.
  • Two precise ball bearings
  • Dynamically balanced
  • Neodym magnet rotor
  • Handmade stator, lightweight rotor allows high revolution.
  • Kevlar bandage rotor
  • Motor mount has two M3 threads for two M3 screws
  • Efficiency up to 88%
  • Recommended gearbox: MEGA GEAR 16
  • Size and weight of these motors are the same as brushed motors of product line MIG 400. They have much better efficiency, power, max. revolutions and long lifetime.
  • Motors are also suitable for 50 - 70 mm diameter ducted fan. 

Motor is designed especially for small and fast models from EPP.

  • can be used for 6 - 10 cells NiCd, NiMH or 2 - 32 Li-POL, Li-ION cells with 6x4" or 6,5x4" propellers.
  • For fast models - e.g. F16 from EPP with flying weight yp to 800g. Propeller 6x4" Graupner, 8 cells 1700 mAh, flying time from 8,5 to 9 minut.
  • can by used with gearbox MEGA GEAR16  1:2 1:2,5 a 1:3,1 for bigger aerobatic models up to flying weight 1,2 kg and with 7 or 8 cells (e.g. with gearbox 1:3,1 for models like DIABLOTIN, propeller 11x4,7" 8 cells, current consumption 11A). Recommended controller: 18A.

Technical data :

Recommended power supply: 4-12 Ni  or  2-4 Lixx
Dimensions: ø 28 mm, length 36,4 mm, ø shaft 3,2 mm
Weight: 76 g
RPM/1V: 2110
Max. current:  25 A
Slope resistance: 22  mΩ
No. winds: 5

At special request we can cupply also motor Mega ACn 16/15/4 with non-standart shaft with diameter 2,3mm. We can recommend this power drive for helicpoter models MicroStar 400 (Graupner) Zoom 400 (Protech) with weight 650 - 700 g, 3 cells Li-Pol 3S1P 1500 – 1800 mAh. 11,1V , current supply approx. 10A, recommended controller 25A

Drive unit MEGA16/15/4 and MEGA GEAR 16 1:2,5

Drive unit consists of brushless motor MEGA ACn 16/15/4 and gearbox MEGA GEAR16   with ratio 1:2,5 , which offers pull 14 N with 7 - 8 NiCD or NiMH cells. It is powerful drive unit that can be used for large diameter propeller for hanging on the propeller or for hight vertical acceleration. Power and motor parameters allow models to keep high horizontal speed.

This drive unit is ideal for models up to 800 g for 3D flying and for speed flight in horizontal direction too. Recommended propeller APC 11x4,7“.

Drive unit also can be used for motor models and electric gliders up to 1,8 kg. Recommended propeller 10“ - 12“.