|
|
Product description and features
This small and lightweight outrunner is offered in four lengths (S, M, L, XL). The A30 motors, are perfect for running on 3S or 4S LiPo batteries. The A30-V4 series comes with an optimized integrated fan and high quality ball bearings. This increases efficiency, stability and increases the range of use. The perfect drive in motor models, electric gliders, paragliders and 3D models.
This weight-optimized high-end motor with a weight of only 104g fits perfectly in Para-RC models. The Para version of the A30-12M V4 motor is already has a backmount mounted shaft.
Accessories
You will find the appropriate controller, batteries and a suitable propeller in the Accessories tab.
Scope of delivery
1x A30-12 M V4 Para kv1370, accessories for front and rear mounting, prop driver and instructions.
Drive recommendation
A30-12 M V4 Para kv1370 | ||||||
---|---|---|---|---|---|---|
Item no: 15716153 | ||||||
Propeller | APC 10x5 | |||||
LiPo | 3S | |||||
Voltage [V] | 11 | |||||
Current [A] | 40 | |||||
Power [W] | 450 | |||||
RPM | 12133 | |||||
Controller [A] | 55-70 | |||||
Timing [°] | 20-25 |
Specifiactions | |
max. power range [W] (max.15 sec.) | 350 |
Poles | 14 |
Idle current (I0) at 8.4V [A] | 2,2 |
Internal resistance (Ri) [Ohm] | 0,022 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 40 - 55 |
Idle speed per volt (kv) | 1370 |
Dimensions and weight | |
Weight [g] | 104 |
Length [mm]/[in] | 34 |
Outer diameter [mm]/[in] | 37,2 |
Shaft diameter [mm]/[in] | 5 |
Delivery contents | |
Prop Adapter | Ja |
Mounting cross | Ja |
Gold plug mm (soldered) | 3,5 |
Backmount mountable | Ja |
Front mountable | Nein |