Detail zboží

Informace o produktu
Výrobce:XPower
Název zboží:HV Elektrické brzdicí štíty 440mm HIGH VOLTAGE (1 pár)
 
Kategorie:PŘÍSLUŠENSTVÍ > Brzdicí štíty >
 
Cena s DPH:2499,00 ks   vložit zboží do košíku
 
Obj. číslo:099ELAFHV44
Dostupnost:skladem
Popis:NOVÁ GENERACE HV (High Voltage) LiPo kompatibilní a rychlejší! Brzdící štíty s elektrickým pohonem a proporcionálním ovládáním. Cena za 1 pár.
Obrázky produktu
více foto...

These are the electric air-brakes that sailplanes fans waited for !

NEW GENERATION HV (High Voltage) > LiPo compatible and faster !

brzdící štíty

Sensational! Electrically driven, connected directly to the receiver, they go in and out proportionally.

Anciens modelers will surely understand me:

Who doesn't have to annoy once, at least, to mechanically connect AB in a complicated area, difficult to access, between the wings into the fuselage,  or to bore on programming the radio to obtain symmetrical closing or opening because of not well made linkage?

This is the main reason to be of these AB.

And moreover, they are more economic than their mechanical counterparts when you add the servo (s) and the hardware to make the linkages.

brzdící štíty

No more problem with the linkages, with the mechanical connections and they finally close in a symmetrical way!

The motor and the drive gears are directly integrated into the air-brake, it is no more necessary to use an external servo with a complicated linkage.

Kliknut�m se zobraz� n�hled

With the integrated locking system to avoid the AB to be sucked off from the closed position - no electricity consumption from the motor in locked position.

Double metal blades (red anodized) Schempp-Hirth type for an optimal braking effect.

Delivered in pair (right and left).

Features:

  • Overall length: 485mm approx.
  • Width: 12mm approx.
  • Heigth AB closed: 16mm approx.
  • Heigth AB opened: 46mm env 
  • Weight: 96g approx. (piece)
  • Blades length : 440mm
  • Height (over plankage of the wing): 30mm max. approx.
  • Input voltage: 4.8-8.4V 
  • Current draw and Speed @4.8V: 0.15-0.20A and 1.2"
  • Current draw and Speed @6.0V: 0.15-0.20A and 0.9"
  • Current draw and Speed @7.4V: 0.16-0.22A and 0.7"
  • Current draw and Speed @8.4V: 0.17-0.22A and 0.6"
  • Electrical motor pulse: 1.5±0.3μs (works with all current radio brands) 
  • Cord length: 420mm approx. (UNI connector)

brzdící štíty 

Důležité upozornění: nastavte prosím správně koncové body pro ovladač, který slouží k ovládání brzdových štítů tak, aby brzdící štít  nemohl najet na koncovou polohu.
Najetí na koncovou polohu znamená spálení motoru na které se nevztahuje záruka.

Important note: Please set correctly the end points for the controller that is used to control the brakes so that the brakes can´t reach the end position. Reaching the end position means burning out the motor, which isn´t covered by the warranty.

Note importante : veuillez bien régler les fins de courses sur votre émetteur afin de ne pas emmener les AF au dela de la butée, cela a pour conséquence de griller le moteur (non pris en charge dans le cadre de la garantie)