cart
download
|
| ||||||||||||||||||||||||||
Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC).
SPIN opto controllers are provided with two JR connectors. Connector on the longer three-line cable with black ending is to be linked to the receiver. Connector on the shorter three-line cable with red ending is intended for communication with JETIBOX; for programming or data reading connect it into slot marked imp. + - on JETIBOX.
| Weight [g] | 45 |
|---|---|
| Dimensions [mm] | 52 x 25 x 14 |
| Sustained current [A] | 70 |
| Telemetry | Yes |
| Operational temperature [°C] | -10 to 85 |
| Supply Voltage [V] | 6 to 26 |
| Batteries NiXX | - |
| Batteries LiXX | 2 to 6 |
| Max. Current BEC [A] | - |
| Voltage BEC [V] | - |
| Max. number of servos | - |
| Resistance in conducting state [mΩ] | 2 x 1.00 |
| Number of power transistors | 48 |
| Cable crossection (input/output) [mm²] | 4.0 / 2.5 |
| Input capacitance [µF] | 2 x 470 |
| OPTO (optically separated radio signal from the power management) | Yes |
|
Manual for SPIN PRO "MENU JETIBOX" - English/German SPIN pro EN MENU JETIBOX.pdf |
|
Manual for SPIN PRO - Czech/English/German SPIN PRO CZ/EN/DE.pdf |
Equipments required for models
 | 099F292508 Název zboží: XPower F2925/8 Windy Price: 97,50€  Delivery status: in stock Recommended number of cells: 4 LiPo, KV: 1380 RPM/V, Max current: 60A (30"), Dimensions: Ø28.1x48.7mm, Weight: 101g, Shaft diameter: 5.0mm |