Product information

Premium medium instant (cyanoacrylate) adhesive with high strength for modelling and general use. Supplied in a bottle with a clog-resistant application tip.

The medium viscosity instant adhesive is ideal for bonding absorbent and non-absorbent materials that adhere well together. Bonds wood, most plastics, metals, rubber, glass, ceramics, cork, paper.

Typical application method: the adhesive is applied to one of the touching surfaces and the parts are immediately pushed together, but the adhesive can also be applied to the joint of well-fitting parts pushed together.

Features

• Colour: clear
• Viscosity: 80–120 mPa.s
• Density: 1,04–1,06 g/cm³
• Optimum application temperature: 23 °C
• Curing time (depending on temperature and nature of materials to be bonded): e.g. nitrile rubber <5 s, - stainless steel 15–20 s
• Full cure: 24 h
• Shear strength: 15–25 N/mm²
• Operating temperature range: -10 °C to +40 °C
• Max. temperature range: -40 °C to +85 °C
• Optimum gap width between bonded parts: zero
• The cured adhesive is soluble in: acetone, dimethylformamide, acetonitrile

Recommended activator/accelerator: KAV9977 KAVAN PRO activator CA spray 150ml

Recommended adhesive/debonding agent: KAV9979 KAVAN CA adhesive 20g

Removing excess uncured adhesive: cloth or paper napkin moistened with acetone (if the bonded materials resist it).

Thinning the adhesive: if the instant adhesive thickens, this is a sign that it has already partially polymerised and lost its original properties - no "thinning" can bring it back. If you need a "thinner" instant glue, simply use a lower-viscosity type. The different types of KAVAN PRO instant adhesives can be mixed together to achieve optimum viscosity.

For use as a sealant, suitable fillers: microballoon filler KAV9980 KAVAN CA filler.

Suitable for bonding: softwood and hardwood, particleboard, plywood, metals, ceramics, porcelain, fibreglass and carbon laminates, fibreglass and carbon fabrics and fibres, many plastics (including EPP and EPO).

Not suitable for bonding: polystyrene foam, polyethylene, Teflon, silicone.

Storing: in a tightly closed container, in a cool, dry and dark place (at +2 °C to +10 °C). Do not expose to temperatures below +2 °C.

Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.

The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. For detailed information see the section "Downloads".

Safety information

The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.

Warning
Contains: ethyl 2-cyanoacrylate
May cause respiratory irritation.
Keep out of reach of children. Avoid breathing vapours. Dispose of contents/container to by disposing in a hazardous waste receptacle.
Cyanoacrylate. Danger. Bonds skin and eyes in seconds. Keep out of the reach of children.

UFI: XTHW-AMUX-4100-XWK9