|
|
The specific conditions of the transmitter (and also receiver) operation call for a dedicated type of LiPo batteries – there is no need for high discharge rate but low self-discharge and tolerance to irregular charging cycles and long term storage in fully charged state are essential. We are happy to introduce a special line of 5/10C KAVAN LiPo batteries optimized for transmitter use.
Do not use a charge rate higher than 1C, the recommended charge rate is 0.5-1C. We recommend using a balancer during every charge. KAVAN transmitter LiPo batteries do not require any initial forming; however, the initial three charging cycles should be performed at a rate not higher than 0.5C. There is no need to discharge the LiPo batteries before the charging - you can charge partly discharged packs.
The batteries are supplied as "Tx Packs“ tailored to the SANWA MT4 / M11X / M12 / M12S / M12RS and FUTABA T6J / T8FG / T12FG and similar transmitters. The packs feature output (charging) cables with Futaba servo connectors and balance cables with JST-XH connectors that could be connected directly to the balance sockets of the most of KAVAN, Raytronic, SkyRC, GT Power etc. chargers.
The package contents: KAVAN 5/10C battery pack, instruction manual.
Capacity [mAh] | 2800 |
Voltage [V] | 7.4 |
Charging current [A] | 1.4 - 2.8 |
Max. charging current [A] | 2.8 |
Discharging current [A] | 14 |
Max. discharging current [A] | 28 |
Energy [Wh] | 20.7 |
Length [mm] | 93 |
Width [mm] | 30 |
Height [mm] | 16.5 |
Weight [g] | 88 |
Equipments required
KAV34.1100 Name: KAVAN C100 Duo balanced charger 2x 500W Price: 149,58€ Delivery status: in stock at supplier Dual channel fast charger with balancers for 1-16 cells NiCd/NiMH, 1-6 cells Li-Po/Li-ion/Li-Fe/LiHV, 2-24V Pb with current 0,2-20A (max. 2x100W with mains power or 2x 500W with DC power). Discharging 0,2-1,5 A (max. 2x 15W). Power supply 10-30V DC/230V AC. Internal resistance measurement. | |
ISDT1018 Name: iSDT BAP2 smart Lipol modul pro 2S Price: 4,96€ Delivery status: in stock at supplier Smart modul pro 2S LiFe,LiPo,LiHv,ULiHv. Připojení přes balanční konektor akumulátoru. Miniaturní rozměry 36x16x9mm, hmotnost pouze 2,8g. Ovládané pomocí BT přes aplikaci BattAir. |