|
|
Product description and features
The A60-L Glider is perfect for large glider models up to approx. 25 kilograms and 12S LiPo drive battery.
- The unobtrusive nose drive for large glider models up to min. 25kg
- Easily removable shaft. The model can be converted back to a glider within a very short time
- E-flight and glider towing in alternation possible.
- Emergency running system (NLS), engine running even with removed shaft safely
- builds on the 1000-times proven Hacker A60-16/18L on
- 83mm long free shaft with 8mm diameter, für the use of a support bearing in the nose
- .
Accessories: FesEx-Uni8 System
Thanks to its special shaft, the motor can be equippedür with the FesEx-Uni8 System (see the Accessories tab) without any further ¨tation.
The propeller can then be removed at the touch of a button, and the model remains a fully-fledged glider in appearance.
The change between self-launching fixed-wing model to pure glider succeeds in seconds.
Accessories
The suitable regulator, batteries and a suitable propeller can be found in the accessories tab.
Note
These setup suggestions are designed for typical scalesegler operation.
This means: climb flight and subsequent sailing down the hill / thermal flying.
This allows the engine to cool down between the climb flights.
Scope of delivery
1 A60-18 L-Glider, kv149, 1x mounting cross and 4x bolts, 1x ball bearing
Drive Recommendations
A60-18 L-Glider, kv149 | ||||||
---|---|---|---|---|---|---|
Artikel-Nr.: 15729608 | ||||||
Propeller | RFM 20x13 | RFM 23x12 | ||||
LiPo | 12S | 12S | ||||
Voltage [V] | 45,00 | 45,00 | ||||
Current [A] | 54,00 | 72,00 | ||||
Power [W] | 2455 | 3240 | ||||
RPM | 6755 | 6150 | ||||
Controller [A] | 85-90 | 85-90 | ||||
Timing [°] | 20-25 | 20-25 |
Specifiactions | |
Poles | 14 |
Turns | 18 |
Idle current (I0) at 8.4V [A] | 1,6 |
Internal resistance (Ri) [Ohm] | 0,02 |
Recommended timing [°] | 20 - 25 |
Switching Frequenzy [kHz] | 8 |
Controller recommendation [A] (depending on setup) | 75 - 90 |
Idle speed per volt (kv) | 149 |
Dimensions and weight | |
Weight [g] | 938 |
Length [mm]/[in] | 97 |
Outer diameter [mm]/[in] | 59 |
Shaft diameter [mm]/[in] | 8 |
Delivery contents | |
Prop Adapter | Nein |
Mounting cross | Ja |
Gold plug mm (recommended) | 4 - 5,5 |
Backmount mountable | Nein |
Front mountable | Ja |