|
|
Brand new ECONOMICAL version kit of our well known DISCUS 2a W.
You'll need about 10 hours to build it, ready for the first flight, instead of 3-5 hours normally.
Very precise quarter scale of the last DISCUS 2a version.
Amazing machine, wonderfully built, nearly ready to fly, only 10 hours work is necessary to complete her.
Flight looks like the real one.
A real winner!
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
Technical specification:
|
|
|
|
|
|
|
RECOMMENDED SERVOS FOR |
4,8V |
7,4V |
AILERONS 2X | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
ELEVATOR 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
RUDDER 1x | HS-85 MG (Hitec) | HS-5087 MH (Hitec) |
AIRBRAKES 2x | HS-82 MG (Hitec) | HS-5087 MH (Hitec) |
TOW HOOK 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D625MW (Hitec) |
RETRACT GEAR 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D625MW (Hitec) |
Suitable setup for take off from the take-off dolly:
|
The kit contents:
- Ready fiberglass fuselage with carbon reinforcements and controls.
- Elevator servo tray already installed in the fin post.
- Transparent canopy to be glued on the fiberglass frame. Rear hatch latch, front dowel.
- Ready foam core abachi wings with metallic airbrakes already installed.
- Ailerons finished ready to be hinged. Steel rod wing joiner.
- Fiberglass hollow molded winglets, horizontal stabiliser and fin.
- Hardware
- Building instructions.
Equipments required
02020-POTEXT Name: Transport bags for Discus 2a Price: 274,00€ Delivery status: in stock The bags are made of very durable multi-layer materials. Set includes: bag for wing, fuselage, elevator and wing joiner. | |
JSP-75-O Name: SPIN 75 PRO OPTO Price: 156,30€ Delivery status: in stock Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC). | |
5MA201110 Name: ORACOVER 10m White (10) Price: 145,42€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 10m. | |
5050EA-12 Name: Xmotor XM5050EA-12 V3 Price: 110,50€ Delivery status: in stock Outrunner brushless electric motor. Ø49.5mm x 48.2mm, RPM 610/1V, weight 290g, Max. 70A (15S), input voltage Lixx 5-6s, shaft 6 mm. | |
020116390 Name: Sailplane retract gear ø 90mm Price: 104,00€ Delivery status: in stock For model on a scale 1:4 and to weight 6 kg. | |
020D01 Name: Sailplane Take-off Dolly I Price: 82,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 219 mm. | |
0200192 Name: GM Scale spinner 44,5/6 white Price: 69,00€ Delivery status: in stock Precision carbon spinner for folding prop Ø44,5 mm, collet 6,0 mm, for blade root width 8 mm. Weight: 20g. | |
02057SP Name: Polystyrene 1:4 sailplane pilot Jan Price: 63,00€ Delivery status: in stock Quarter scale sailplane pilot doll. Hand painted. Designed for Discus 2a, Discus 2c, Ventus 2cx. Weight: 39g. | |
020SERVISEG Name: Construction Service ((installation of EG tow hook in Discus, Ventus, Swift and Fox fuselages) Price: 49,90€ Delivery status: in stock The price includes the towing hook (item no. 020201EG) and gluing to the fuselage, see picture. Also included is a tow hook servo tray (item no. 20201EG.ST). We recommend this service if the model is equipped with a motor, but you would like to keep the possibility of getting the model into the air by towing. Notice: for the combination of motor and tow hook | |
02020PDDEL Name: Panel instrument Discus 2a Deluxe Price: 46,00€ Delivery status: in stock Assembled and fully equipped with board instruments. fiberglass gelcoated | |
02020s Name: Seat Discus 2a Price: 46,00€ Delivery status: in stock fiberglass gelcoated | |
020GM14.8W Name: GM 14 X 8 F (White) Price: 44,00€ Delivery status: in stock Carbon folding prop 14x8", blade root width 8 mm, the pin dia. 3mm. | |
1HI38801 Name: D625MW rychlé a silné digi servo (10kg) Price: 43,71€ (recommended quantity: 2 pieces) Delivery status: in stock Rychlé digi servo s kovovými převody nové generace s elektronikou s bleskurychlou odezvou pro všeobecné použití. Programovatelné, napájení 4,8-7,4V. Tah 6,3kg.cm, rychlost 0,20s/60°při 4,8V, tah 10kg.cm, rychlost 0,13s/60° při 7,4V. Náhrada HS-5625MG a HS-5665MH. Notice: 7,4V for: 1x tow hook, 1x retract gear | |
1HI3181 Name: HS-5087 MH HiVolt DIGITAL Price: 41,63€ (recommended quantity: 6 pieces) Delivery status: in stock Silné digitální mikroservo 22g s kovovými převody a zvýšeným napájecím napětím (až 2S LiPo) pro elektrolety a větroně. 1xBB, tah 4,3 kg/cm, rychlost 0,13s/60st při 7,4V. Programovatelné. Notice: 7,4V for: 2x aileron, 2x airbrake, 1x elevator, 1x rudder | |
020SERVISDISCUS Name: Construction Service (Cutting the nose of the Discus fuselage for 44,5mm GM spinner including gluing the motor mount) Price: 37,80€ Delivery status: in stock The used motor mount is intended for the recommended Dualsky 5050 motor. If you are interested in gluing the motor mount for another motor, please contact us. | |
1HI3115-1x Name: HS-645 MG bulk 1pc unpacked Price: 34,00€ (recommended quantity: 2 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 1x tow hook, 1x retract gear | |
5MA200110 Name: ORACOVER 2m white (10) Price: 31,21€ Delivery status: in stock Weight: 89 g/m2 ; width is 60 cm; lenght 2m. | |
1HI3050-1x Name: HS-85 MG Bulk 1pc Price: 28,40€ (recommended quantity: 4 pieces) Delivery status: in stock Strong microservo 21g with metal gears for electric planes and sailplanes. 1xBB, torque 3,0 kg/cm, speed 0,16s/60st in 4,8 V. Notice: 4,8V for: 2x aileron, 1x elevator, 1x rudder | |
02020PD Name: Panel instrument Discus 2a Price: 26,00€ Delivery status: in stock fiberglass gelcoated. Dashboards are delivered in Half state for easy installation onboard instruments. | |
1HI3042-1x Name: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: 4,8V for: 2x airbrake | |
02020-CB Name: Cabling for Discus 2a wings TOPMODEL CZ Price: 17,80€ Delivery status: in stock | |
02020-7 Name: Discus 2a - 3,75m sticker Price: 16,90€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Discus 2a - 3,75m wingspan. | |
020201EG Name: Tow hook EG Price: 13,90€ Delivery status: in stock For FES (Front Electric Sustainer) model version . Dimensions: 50x20x8mm, pushrod Ø3mm. Notice: for the combination of motor and tow hook | |
02020-ON Name: Protective sleeve for Discus 2a canopy Price: 12,00€ Delivery status: in stock Protective sleeve to prevent scratching during storing and transporting the model. | |
02020-DOOR Name: Doors for sailplane retract gear Discus 2a Price: 9,90€ Delivery status: in stock Spare doors for sailplane retract gear. | |
1HI7165 Name: Servo lock HS-80/81/82/85/5087 Price: 9,13€ Delivery status: in stock "Dish" with cap and aerodynamic cover rod. 1 pair. | |
02057-cabinlatch Name: Cabin latch Discus 2c, Discus 2a, Ventus 2cx Price: 8,10€ Delivery status: in stock | |
05013 Name: Remote tow hook for up to wingspan 4,5 m Price: 6,80€ Delivery status: in stock Made in aluminium. To be glued inside the nose of the gliders (like the real one). A hook connected to the servo rotates in a slot, and in doing so, "capture" the towing cable.for gliders up to wingspan 4,5 m, Ø10mm, length 48mm | |
02020-DOOR-PLATE Name: Plate for the production of Discus 2a retract gear door Price: 5,90€ Delivery status: in stock Material: white gelcoated fiberglass. Dimensions: approx. 80x125mm | |
0492004 Name: Sliding canopy window 1:4 Price: 5,60€ Delivery status: in stock Sliding window, scale 1:4. | |
020201EG.ST Name: Servo tray for EG tow hook Price: 4,25€ Delivery status: in stock For standard servo. Suitable for EG tow hook for Discus 2a, Discus 2c, Ventus 2cx, Swift S1 3.73m, Swift 3.14m. Notice: for tow hook EG | |
0492114 Name: ASSEMBLY JIG for SLIDING WINDOW 1:4 Price: 3,90€ Delivery status: in stock Wise Jig to install more easily the sliding windows on the canopies of your gliders 1:4 scale | |
020CH50ML Name: Pattex Chemoprén Extrém 50ml Price: 3,12€ Delivery status: in stock For contact bonding with very high strength. Especially for bonding leather, wood, rubber, textiles, metal, plywood, cardboard and various materials from hard plastics. Notice: for gluing cabin to the frame | |
02020-DSP Name: Spring for closing the retract gear door (Discus 2a, Discus 2c, Ventus 2cx) 2pcs Price: 2,24€ Delivery status: in stock Tension spring terminated by eyelets. Material: wire Ø0,5mm. Dimensions Ø5x47mm. Package content: 2pcs. | |
N3037 Name: Wheel Ø37 Price: 2,00€ Delivery status: in stock Ø37 x 15mm hole Ø3 mm Price per piece. Notice: tail wheel | |
0167823-0,25 Name: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery, receiver, etc. | |
181840 CAN9 Name: Connector CAN 9 Price: 1,50€ (recommended quantity: 2 pieces) Delivery status: in stock Two-Row connector, 9 PIN. Connector suitable for wiring of servos in the wing and fuselage. By using this connector is not necessary for each assembly / disassembly wing separate cables to connect the servos to the receiver. Price for 1 pair. | |
0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
02020-1-24 Name: Tow hook servo tray (Discus 2a, Discus 2c, Ventus 2cx) Price: 1,30€ Delivery status: in stock | |
020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
8GR3009 Name: Servo Cable Twisted Thick JR 0.25mm2 Price: 1,04€ Delivery status: in stock Twisted Servocable (three-row) 0,25mm². Price per common meter. 1 m Weight 13 grams. Notice: 5m | |
9001 Name: Thermo-Shrinkable insulation Ø1,6mm (1m) Price: 0,85€ Delivery status: in stock For isolation of soldered joints of thin cables Ø1,6mm Price per 1 m. Notice: 0,4m |
Spare parts
02020-1DL Name: Fuselage Discus 2a Deluxe Price: 577,00€ Delivery status: in stock Completely fitted fuselage (equipped with canopy+frame, towing hook, retractable landing gear, connectors with cables, seat, dashboard, rudder). Covered with stickers. White fiberglass. Length 1610 mm. | |
02020-2DL Name: Discus 2a 3,75m ARF DELUXE Wings Price: 517,10€ Delivery status: in stock Wingsnap 3,73m.. Wings with metallic airbrakes installed. Wing fixing device already installed and servos connector also.Stickers are sticked on wings.Covered Oracover® | |
02020-2ARF Name: Discus 2a 3,75m ARF STANDARD Wings Price: 462,90€ Delivery status: in stock Wings with metallic airbrakes installed. Covered Oracover® | |
02020-2ARC Name: Discus 2a 3,75m STANDARD Wings (uncovered - ready to cover) Price: 375,30€ Delivery status: in stock Wings with metallic airbrakes installed. not covered. | |
02020-1 Name: Fuselage Discus 2a Price: 205,00€ Delivery status: in stock fiberglass white gelcoated, length 1535 mm | |
02020-6DL Name: Canopy Discus 2a De luxe 3,75 m Price: 128,00€ Delivery status: in stock Set including closing window. Material: Vivak® 1mm, transparent. | |
02020-3 Name: Discus 2a elevator Price: 69,00€ Delivery status: in stock Fibreglass laminate elevator, spare part. Length 623mm, weight 98g. The package includes 1x elevator and 1 x 2290 BR. | |
0203016 Name: Airbrakes 300mm (1 pair) Price: 53,00€ Delivery status: in stock Aerodynamic brakes for model up to 4,5 m wingspan. 1 pair | |
02020-6-14 Name: Canopy Discus 2a with window 1:4 Price: 42,00€ Delivery status: in stock Canopy with installed 1:4 scale window. Material: Vivak® 1mm, transparent. | |
02020-4 Name: Discus 2a rudder Price: 36,90€ Delivery status: in stock white engrained laminate, spare part. The package includes 1x rudder and 1 x 2290 BR. | |
02020-23 Name: Wing tip Discus 2a Price: 35,00€ Delivery status: in stock 1 pair, 108 mm width at the root, airfoil HQ 3/12 | |
02020-6 Name: Canopy Discus 2a Price: 29,50€ Delivery status: in stock Material: Vivak® 1mm, transparent. | |
02020-5 Name: Canopy frame Discus 2a Price: 29,00€ Delivery status: in stock fiberglass | |
02020-6II Name: Canopy Discus 2a II.QUALITY Recommended price: 29,50 (-40% discount) Price: 17,70€ Delivery status: in stock Material: Vivak® 1mm, transparent. II.QUALITY | |
02020-24 Name: Discus 2a Wing joiner Price: 14,90€ Delivery status: in stock Material : steel; Length : 440mm; diameter : 12mm; weight : 393g. | |
020910W Name: 2K White paint 100ml + hardener TOPMODEL CZ Price: 13,30€ Delivery status: in stock 2K acrylic white paint used for laminating TOPMODEL CZ parts. | |
0203016.2 Name: Cover plates for 300mm airbrakes (2pcs) Price: 6,50€ Delivery status: in stock Fiberglass cover plates for 300mm airbrakes. Unpainted. Set contains 2 pcs. Dimensions: 9,5 x 309 x 1 mm | |
TAPE12 Name: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
02020-6-5 Name: Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (front + rear) Price: 4,50€ Delivery status: in stock fiberglass | |
03800 Name: Clip fixing 2 pairs Price: 3,50€ Delivery status: in stock for wing fixing, plastic, 2 pairs. 2 pair ( 2 pcs into fuselage + 2 pcs into wing + 1x disconnect wedge for wings) | |
190124827 Name: Cabin latch Price: 2,70€ Delivery status: in stock from steel + plastic Notice: canopy fixing standard | |
05028 Name: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. Notice: airbrake servo mount | |
0200GFLAG Name: Germany flag 2pcs Price: 1,85€ Delivery status: in stock dimensions: 51x36mm, color: black / red / gold | |
02020-7INSCD2A Name: Lettering sticker under canopy for Discus 2a (2pcs) Price: 1,60€ Delivery status: in stock | |
02020-4-1 Name: Hinge for fixing the Discus 2a (Discus 2c, Ventus 2cx) rudder Price: 1,50€ Delivery status: in stock material: PVC | |
2290 BR Name: Brass control horn M3 short 2 pcs Price: 1,44€ Delivery status: in stock Very small, aerodynamic clear, brass control horn for metal or plastic clevises (MPJ 2110, 2140). Content of package: 2 pcs Notice: for airlerons, elevator and rudder | |
1004 AL Name: Mounting nut M3 4pcs Price: 1,44€ Delivery status: in stock Fixing nuts, aluminum alloy, assembly gluing, M3 thread. 4pcs Notice: nut for ailerons horn | |
02020-6-3 Name: Canopx hinge shaft Discus 2c, Discus 2a, Ventus 2cx Price: 1,30€ Delivery status: in stock | |
519.1,5.1250 Name: Steel wire 1.5mm, 1250mm Price: 1,10€ Delivery status: in stock Spring steel wire suitable for landing gears, wing joiners, shafts, struts, tailwheel systems, etc. Notice: rudder pushrod | |
020CAN-01 Name: Spacer pad for CAN9 and CAN15 connector Price: 0,70€ Delivery status: in stock | |
terc60 Name: target Ø60mm stickers Price: 0,25€ Delivery status: in stock Notice: airbake servo top |