|
|
High torque/high speed programmable digital low-profile brushless servo with titanium gear aand double BB-ed output shaft. Works great in F3A aerobatic planes, hotliners, 400-500 size 3D helicopters, etc. All-aluminium case for perfect cooling under high load.
GO-1035MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
- Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
- Servo Neutral: Servo neutral (centre) position setting.
- Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
- PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
- Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
- Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
- Reverse: Reverses the servo movement direction.
- Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
- SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
- Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
- (a) Release: No fail-safe protection.
- (b) Keep Position: Keeps the position corresponding to the last correct control signal.
- (c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
- Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
- Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-8.4 V (nominal).
25T/5.92 mm output shaft.
Servo dimensions | Mini |
Servo type | Digital |
Thrust at 4.8V [kg∙cm] | 10 |
Thrust at 6.0V [kg∙cm] | 12 |
Thrust at 7.4V [kg∙cm] | 15 |
Thrust at 8.4V [kg∙cm] | 16 |
Speed at 4.8V [s/60st.] | 0.125 |
Speed at 6.0V [s/60st.] | 0.11 |
Speed at 7.4V [s/60st.] | 0.09 |
Speed at 8.4V [s/60st.] | 0.08 |
Servo gears | Titanium |
Ball bearings | 2× |
High-voltage | Yes |
Power supply [V] | 4.8 - 8.4 |
Length [mm] | 35.5 |
Width [mm] | 15 |
Height [mm] | 29.2 |
Weight [g] | 45 |
Intended for | Aeroplanes,Helicopters |
Equipments required
KAV20.0001 Název zboží: GO servos USB programmer Price: 24,96€ Delivery status: contact us USB programmer/interface for programming KAVAN GO digital servos of the GO-10xx/11xx/12xx series with the help of a convenient PC operating program for Windows XP, Vista, 7, 8, 10 (32/64bit). |
Spare parts
KAV20.1035MG.3 Název zboží: GO-1035MG servo case Price: 37,46€ Delivery status: in stock at supplier | |
KAV20.1035MG.1 Název zboží: GO-1035MG gear set Price: 11,63€ Delivery status: in stock at supplier | |
KAV20.1035MG.2 Název zboží: GO-1035MG horn set Price: 1,46€ Delivery status: contact us |
Equipments required for models
XL55V2K01 Název zboží: Nimbus 550 kit - pro mini serva Price: 612,08€ Delivery status: contact us Stavebnice mechaniky špičkového 3D vrtulníku třídy „550" s CCPM deskou cykliky 120° s flybarless nosným rotorem pro listy 520-570 mm pro pohon střídavým motorem třídy 4020-4035 a 6-12S LiPo. Obsahuje: kompletní díly mechaniky s držáky pro miniserva cykliky a návod; neobsahuje motor, elektroniku, listy nosného a vyrovnávacího rotoru. | |
OMPP004R Název zboží: 60” Edge 540 ARF - červená 1,52m Price: 457,92€ Delivery status: in stock at supplier ARF stavebnice 3D akrobatického speciálu o rozpětí 1 524 mm, určená pro pohon střídavým elektromotorem 1200-1600W se 6S LiPo. Velmi lehká konstrukční stavba z dílů vyztužených Kevlarem® a uhlíkem, mnoho uhlíkových dílů. | |
OMPP004O Název zboží: 60” Edge 540 ARF - oranžová 1,52m Price: 457,92€ Delivery status: in stock at supplier ARF stavebnice 3D akrobatického speciálu o rozpětí 1 524 mm, určená pro pohon střídavým elektromotorem 1200-1600W se 6S LiPo. Velmi lehká konstrukční stavba z dílů vyztužených Kevlarem® a uhlíkem, mnoho uhlíkových dílů. | |
OMPP004G Název zboží: 60” Edge 540 ARF - zelená 1,52m Price: 457,92€ Delivery status: in stock at supplier ARF stavebnice 3D akrobatického speciálu o rozpětí 1 524 mm, určená pro pohon střídavým elektromotorem 1200-1600W se 6S LiPo. Velmi lehká konstrukční stavba z dílů vyztužených Kevlarem® a uhlíkem, mnoho uhlíkových dílů. | |
OMPP004Y Název zboží: 60” Edge 540 ARF - žlutá 1,52m Price: 457,92€ Delivery status: in stock at supplier ARF stavebnice 3D akrobatického speciálu o rozpětí 1 524 mm, určená pro pohon střídavým elektromotorem 1200-1600W se 6S LiPo. Velmi lehká konstrukční stavba z dílů vyztužených Kevlarem® a uhlíkem, mnoho uhlíkových dílů. |