|
|
High-power controller of BLDC motors offers continuous current up to 60A at a voltage of up to 51V (12S LiPo). It offers a high-quality stabilized voltage output (BEC) with a continuous current of up to 12A and the possibility of connecting an external shutdown switch.
The IBEX product line represents advanced speed controllers for use exclusively in RC airplane models. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight and precise motor control.
MAV Sense products are designed and manufactured in the Czech Republic
Features
- Small dimensions combined with high power motor control.
- A powerful switching BEC that offers a continuous current of 12A (25A max). BEC circuit protection against overcurrent and overheating is included.
- BEC voltage 5.5-8.4 V, setting in steps of 0.1V.
- Over- and undervoltage protection, overtemperature protection, motor-stall protection.
- Configurable current limiter.
- Safety shutdown when the throttle impulse is lost.
- Configurable acceleration, timing, electromagnetic brake etc.
- Low acoustic noise due to high frequency switching.
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2. Alternative firmware with Spektrum SRXL2 telemetry support.
- Telemetry (RC system dependent): voltage, current, power, capacity, temperature, RPM, energy.
- Telemetry min/max values are logged.
- Configuration through the transmitter or external terminal (JETIBOX/SMART-BOX).
- Firmware updates via USB interfaceusing the MAV Manager software.
- Languages: CZ/DE/EN/FR/IT.
Additional functions
- Option to activate the synchronous rectification (Active Freewheeling) for more accurate motor response and less heating of the controller during aerobatics.
- Optional use of external on-off switch / push button / Hall-sensor / RC switch / Touch Switch.
- Flawless operation with high power multi-pole motors and the vast majority of all other motor types.
- Optional connection of backup battery without additional adapters.
- Propeller positioning using an optional Hall sensor.
- Optional external motor identification chip combined with an optional temperature sensor.
The set contents: IBEX speed controller, instruction manual.
Used for | Aeroplane |
Type | AC |
Constant current [A] | 60 |
Max. peak current (2 s) [A] | 100 |
LiXX cells | 2 - 12 |
BEC voltage [V] | 5.5 - 8.4 |
BEC current [A] | 12 |
Length [mm] | 75 |
Width [mm] | 29.5 |
Height [mm] | 12 |
Weight [g] | 68 |
Control | one-way |
Brake | Yes |
Sensor imputs | Yes |
Programmable | Yes |
Equipments required
MAV0007 Název zboží: MAV Sense magnetic switch Price: 24,96€ Delivery status: contact us A contactless magnetic switch for switching on/off of compatible MAV Sense devices including IBEX line ESCs. Dimensions 14x11.5x4mm, weight 2g, stand-by power drain 50µA. | |
MAV0026 Název zboží: MAV Sense Motor temperature sensor Price: 24,96€ Delivery status: in stock at supplier A miniature telemetry temperature sensor for temperature measurement of electric motors; for the IBEX line of MAV Sense ESCs. Compatible telemetry systems: Futaba S.BUS2, JETI Duplex EX, Multiplex MSB, Graupner HoTT, Powerbox P2Bus. Setting up with transmitters, Jetibox or MAV Sense PC USB interface. Dimensions 21.5x10x4mm, weight 1g. | |
MAV0009 Název zboží: MAV Sense USB interface Price: 15,79€ Delivery status: in stock at supplier PC USB interface for setting up, telemetry data logging (incl. online telemetry display) and firmware update of compatible MAV Sense devices on your PC. MINI USB B (USB 2.0) port. Dimensions 33x12x6 mm, weight 2g, input voltage 5 V (from the PC). | |
MAV0025 Název zboží: MAV Sense hall position sensor Price: 14,54€ Delivery status: in stock at supplier Magnetic (Hall) propeller position sensor for MAV Sense IBEX line ESCs enabling to stop the motor and propeller at an exact position defined by the magnetic sensor location. Dimensions 12x8x3mm (sensor), Ø 3x2mm (magnet). |