Product information

Microballoon filler for instant (cyanoacrylate) adhesives. Lightweight filler for instant adhesives and epoxies for filling holes, cracks, crevices and surface irregularities. The filler consists of an inert material (glass) and can be used on all materials (wood, metals, plastics, etc.) that are not attacked by the instant adhesive used.

Properties

• Density: 2.45 g/cm³
• Hardness: 5150 N/mm² (Knoop)/6 (Mohs)

Use: the filler can be applied in conjunction with the instant adhesive using one of two basic methods:

• Fill the required space with CA filler. Apply the filler with the instant adhesive and allow to cure.
• Fill the desired space with instant adhesive, quickly apply CA filler and allow to cure.

Suitable for: super thin, thin and medium instant adhesives.

Not suitable for: thick and gel instant adhesives.

Storing: in a tightly closed container, in a cool, dry and dark place (at 0 °C to +40 °C). Do not expose to temperatures below 0 °C.

Shelf life: under proper storage conditions, we guarantee a shelf life of 2 years in the unopened original packaging while maintaining the above product properties.

The product is not classified as dangerous within the meaning of Regulation (EC) No 1272/2008.

Safety information

The mixture is not classified as dangerous according to Regulation (EC) No. 1272/2008.